Force10 S60-44T - Network Card/Adapter DELL - Free user manual and instructions
Find the device manual for free Force10 S60-44T DELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch (Layer 2/3 Managed) |
| Model | Force10 S60-44T |
| Ports | 44 x 10/100/1000Base-T (RJ-45) + 4 x 10GbE SFP+ |
| Management Port | 1 x RJ-45 console + 1 x 10/100/1000 out-of-band |
| Form Factor | 1U Rackmount |
| Dimensions (W x D x H) | 44.5 cm x 43.8 cm x 4.4 cm |
| Weight | 7.5 kg (16.5 lbs) |
| Power Supply | AC 100-240 V, 50-60 Hz, 260 W max |
| Cooling | Internal fans (front-to-back airflow) |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 132 Mpps |
| VLAN Support | Up to 4094 VLAN IDs |
| Layer 2 Features | STP, RSTP, MSTP, VLAN Trunking, Link Aggregation |
| Layer 3 Features | Static Routing, RIP, OSPF, VRRP |
| Quality of Service (QoS) | 8 priority queues, DSCP, CoS |
| Security | ACL, 802.1X, Port Security, SSH/SSL |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 10% to 95% (non-condensing) |
| MTBF | 200,000 hours |
| Compliance | FCC Class A, CE, UL, RoHS |
Frequently Asked Questions - Force10 S60-44T DELL
How to reset the Dell Force10 S60-44T to factory defaults?
Hold the Reset button on the front panel for at least 10 seconds while the device is powered on. The system will reboot and restore default settings.
Can the S60-44T be stacked with other switches?
Yes, the S60-44T supports stacking via the dedicated 40GbE stacking ports (QSFP+) when using compatible stacking cables and modules.
What is the maximum power consumption of the S60-44T?
The maximum power consumption is 260 watts under full load, using the internal AC power supply.
How to access the web management interface?
Connect to the management port or any data port, assign an IP address via DHCP or static, then open a browser to https://
What type of cables are needed for the 10GbE SFP+ ports?
Use SFP+ transceivers (fiber or copper) or direct-attach copper (DAC) cables for distances up to 10 meters.
Is the S60-44T fan noise loud?
The switch uses variable-speed fans that adjust based on temperature. At idle, noise level is around 45 dBA; under load it can reach 55 dBA.
How to update the firmware?
Download the latest firmware from Dell Support, then upload via the web interface under Maintenance > Upgrade. Ensure you have a backup of the current configuration.
What are the supported VLANs?
The switch supports 802.1Q VLAN tagging with up to 4094 VLAN IDs, including voice VLAN and private VLAN.
Can the switch be mounted in a 2-post rack?
Yes, the S60-44T includes rack-mount brackets for 2-post and 4-post racks. Use the provided screws and slide rails for proper installation.
What is the warranty period?
Dell offers a standard limited lifetime warranty for the Force10 series, including hardware replacement with advance exchange.
User questions about Force10 S60-44T DELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network Card/Adapter in PDF format for free! Find your manual Force10 S60-44T - DELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Force10 S60-44T by DELL.
USER MANUAL Force10 S60-44T DELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DELL
Model : Force10 S60-44T
Category : Network Card/Adapter