W-IAP155 - Uncategorized DELL - Free user manual and instructions
Find the device manual for free W-IAP155 DELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | Dell |
| Model | W-IAP155 |
| Wireless Standard | 802.11ac Wave 2 |
| Frequency Bands | 2.4 GHz, 5 GHz |
| MIMO Configuration | 2x2:2 |
| Maximum Data Rate | 867 Mbps (5 GHz) |
| Ethernet Ports | 1 x Gigabit Ethernet (PoE in) |
| Power Method | 802.3af PoE or DC adapter (12V) |
| Dimensions (W x D x H) | 160 x 160 x 35 mm (6.3 x 6.3 x 1.4 in) |
| Weight | 0.25 kg (0.55 lbs) |
| Mounting | Ceiling or wall (bracket included) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Operating Humidity | 5% to 95% (non-condensing) |
| Security | WPA2, WPA3, 802.1X |
| Management | Web-based GUI, CLI, Aruba Instant |
| LED Indicators | Power, Ethernet, WLAN status |
| Care and Cleaning | Wipe with dry cloth; avoid liquids |
| Spare Parts / Repairability | Not user-serviceable; contact Dell support |
| Included Accessories | Mounting bracket, screws, quick start guide |
Frequently Asked Questions - W-IAP155 DELL
How do I reset the Dell W-IAP155 to factory defaults?
Press and hold the reset button on the back of the access point for about 10 seconds until the LED blinks red. Release and the device will reboot with factory settings. Ensure you have a backup of your configuration.
What is the default IP address for initial setup?
The default IP is 192.168.1.1. Alternatively, you can use the Aruba Instant app or DHCP to discover the device. The default username and password are 'admin' and 'admin'.
Can I use the W-IAP155 without a controller?
Yes, it supports Instant mode, allowing standalone operation. You can configure it via the web interface or mobile app without needing a separate controller.
What power supply is needed?
It supports Power over Ethernet (802.3af) or a 12V DC adapter (not included). Ensure your PoE switch provides sufficient power.
How do I update the firmware?
Download the latest firmware from Dell's support site. Log into the web interface, go to Maintenance > Firmware Upgrade, and upload the file. Do not power off during the upgrade.
What wireless security options are available?
The access point supports WPA2, WPA3, and 802.1X. You can configure multiple SSIDs with different security settings.
Can I mount it on a wall?
Yes, the included bracket allows both ceiling and wall mounting. Attach the bracket securely and snap the access point into place.
What is the range of the W-IAP155?
Indoor range is approximately 30-50 meters (100-165 ft) depending on obstacles. The 2.4 GHz band offers better range, while 5 GHz provides higher speeds.
How do I access the web interface?
Connect to the access point via Ethernet or Wi-Fi. Open a browser and navigate to its IP address (default: 192.168.1.1). Use the admin credentials.
What is the maximum number of simultaneous clients?
It can support up to 256 clients, but performance may degrade with many active users. Typical recommended limit is about 50-75 clients per radio.
User questions about W-IAP155 DELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual W-IAP155 - DELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. W-IAP155 by DELL.