WP800 - Heating HARVIA - Free user manual and instructions
Find the device manual for free WP800 HARVIA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Sauna Heater |
| Model | WP800 |
| Brand | Harvia |
| Power | 8.0 kW |
| Voltage | 230V / 50Hz |
| Phase | 1-phase |
| Dimensions (W x H x D) | 400 x 600 x 300 mm |
| Weight | 12 kg |
| Stone Capacity | 20 kg |
| Heating Material | Stainless Steel |
| Control Type | Manual (built-in thermostat) |
| Temperature Range | 60–110 °C |
| Sauna Room Size (approx.) | 8–13 m³ |
| Safety Features | Overheat protection, thermal fuse |
| Installation | Wall-mounted |
| Maintenance | Regular stone cleaning, check connections |
| Warranty | 2 years |
| Spare Parts Available | Heating elements, thermostat, stones |
| Certifications | CE, TÜV |
Frequently Asked Questions - WP800 HARVIA
What is the recommended sauna room size for the Harvia WP800?
The Harvia WP800 is suitable for sauna rooms of 8 to 13 cubic meters (approx. 280–460 cubic feet).
How do I install the WP800 heater?
Installation should be done by a qualified electrician. The heater must be wall-mounted with proper clearance from walls and ceiling, following the dimensions in the manual.
What type of stones should I use?
Use sauna stones specifically designed for electric heaters, typically 5–10 cm diameter. Do not use ceramic stones or river rocks.
How often should I replace the stones?
Replace stones every 1–2 years or when they show signs of crumbling or excessive dust. Regular cleaning extends their life.
Can I use the heater without stones?
No, the stones are essential for heat storage and steam production. Operating without stones can damage the heater and poses a fire risk.
What are the safety features of the WP800?
The heater includes overheat protection and a thermal fuse that automatically shuts off the power if the temperature exceeds safe limits.
How do I clean the heater?
Disconnect power before cleaning. Wipe the exterior with a damp cloth. Do not use abrasive cleaners. Clean stones by removing and rinsing with water annually.
What is the power supply requirement?
The WP800 requires a 230V AC, 50Hz, 1-phase electrical connection with a dedicated circuit breaker rated for 40A.
Can I install the heater outdoors?
No, this heater is designed for indoor sauna rooms only. Outdoor installation would void the warranty and pose safety hazards.
Where can I find spare parts?
Spare parts such as heating elements, thermostats, and stones are available from authorized Harvia dealers or online stores. Always use genuine parts.
User questions about WP800 HARVIA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual WP800 - HARVIA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WP800 by HARVIA.
USER MANUAL WP800 HARVIA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HARVIA
Model : WP800
Category : Heating