KN-COP-IC - Gas detector KIDDE - Free user manual and instructions
Find the device manual for free KN-COP-IC KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Carbon Monoxide Alarm with Digital Display |
| Brand | Kidde |
| Model | KN-COP-IC |
| Power Source | 120V AC hardwired with 9V battery backup |
| Sensor Type | Electrochemical |
| Display | Digital LCD showing CO level in PPM |
| Dimensions (H x W x D) | 5.5 x 4.2 x 2.0 inches |
| Weight | 1 lb (0.45 kg) |
| Peak Level Memory | Yes, displays highest CO level recorded |
| Test/Reset Button | Yes, tests alarm and sensors |
| End-of-Life Warning | Yes, chirps after 10 years |
| Alarm Sound | 85 dB at 10 feet |
| Installation | Wall or ceiling mount included |
| Compliance | UL listed, meets ANSI/UL 2034 standards |
| Warranty | 10 years limited |
| Battery Replacement | 9V battery to be replaced annually or when low |
| Maintenance | Vacuum clean vents monthly; test weekly |
| Silence Feature | Yes, temporarily silences low battery or alarm |
| Repairability | Non-repairable; replace unit at end of life |
Frequently Asked Questions - KN-COP-IC KIDDE
How do I install the Kidde KN-COP-IC alarm?
Mount the alarm on a wall or ceiling using the included bracket. Connect to 120V AC wires and insert a 9V backup battery. Follow the manual for proper location.
What does the digital display show?
The digital display shows the current carbon monoxide (CO) level in PPM (parts per million). It also displays peak levels and error codes.
How do I test the alarm?
Press and hold the Test/Reset button until the alarm sounds. The display will show a test pattern. Release the button to stop the test.
What should I do if the alarm sounds?
If the alarm sounds continuously, evacuate immediately and call emergency services. Do not re-enter until the source of CO is identified and the alarm stops.
How do I silence a false alarm?
Press the Silence button to temporarily quiet the alarm. The alarm will automatically reset after about 4 minutes unless CO levels are still dangerous.
How often should I replace the battery?
Replace the 9V backup battery at least once a year or when the low battery chirp every 30 seconds occurs.
When should I replace the entire alarm?
Replace the unit after 10 years from the date of installation, or when the End-of-Life warning chirps. The manufacturing date is on the back.
Can I paint the alarm?
No, painting the alarm can block the vents and sensor, causing malfunction. Keep the unit unpainted.
How do I clean the alarm?
Use a vacuum cleaner with a brush attachment to gently clean the vents monthly. Do not use water or solvents.
What does a single chirp every 30 seconds mean?
A chirp every 30 seconds indicates a low battery. Replace the 9V battery immediately. If chirping continues, the unit may need replacement.
User questions about KN-COP-IC KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Gas detector in PDF format for free! Find your manual KN-COP-IC - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KN-COP-IC by KIDDE.
USER MANUAL KN-COP-IC KIDDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KIDDE
Model : KN-COP-IC
Category : Gas detector