MP75 - Printer Panduit - Free user manual and instructions
Find the device manual for free MP75 Panduit in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable label printer |
| Brand | Panduit |
| Model | MP75 |
| Dimensions (H x W x D) | Approx. 7.6 x 10.2 x 15.2 cm (3 x 4 x 6 in) |
| Weight | Approx. 0.5 kg (1.1 lb) |
| Power Supply | AC adapter (100-240V, 50/60Hz) or 6 AA batteries |
| Print Technology | Thermal transfer |
| Max Print Width | Up to 60 mm (2.4 in) |
| Resolution | 203 dpi |
| Print Speed | Up to 50 mm/s (2 in/s) |
| Supported Media | Continuous labels, die-cut labels, heat shrink tubing |
| Display | Backlit LCD, 128 x 64 pixels |
| Keyboard | QWERTY, 60 keys |
| Memory | Stores up to 999 files |
| Battery | Rechargeable NiMH, 6V, 2000mAh |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Connectivity | USB 2.0 |
| Warranty | 1 year limited |
| Cleaning | Clean print head with isopropyl alcohol and soft cloth |
| Safety | Use only approved power adapter; keep away from moisture |
| Repairability | Replaceable print head and cutter blade |
Frequently Asked Questions - MP75 Panduit
How do I load labels in the Panduit MP75?
Open the cover, insert the label roll with the inner core facing down, and feed the label through the guide until it exits the front. Close the cover and press the Feed button to align the label.
What type of batteries does the MP75 use?
The MP75 can be powered by 6 AA alkaline batteries or a rechargeable NiMH battery pack (optional). Use the AC adapter to charge the rechargeable pack.
How do I change the print head?
Turn off the printer, open the cover, and release the print head latch. Disconnect the cable, replace with a new head (part # PTH-75), reconnect, and secure the latch.
My labels are printing faintly. What can I do?
Check the darkness setting in the menu and increase it. If still faint, clean the print head with an alcohol swab. Also ensure you are using genuine Panduit labels.
Can I connect the MP75 to a computer?
Yes, via USB. Use Panduit's LabelMark software to design and transfer label files to the printer.
How do I perform a factory reset?
Press and hold the Menu and Enter keys simultaneously while turning on the printer. Select 'Factory Reset' and confirm.
What is the maximum label width?
The MP75 supports labels up to 60 mm (2.4 inches) wide. For heat shrink tubing, use pre-cut lengths or continuous tube.
Why is the printer making a clicking noise?
The clicking is likely the cutter mechanism. If labels are not cutting cleanly, check for jammed labels or a dull blade. You can replace the cutter blade (part # PCB-75).
How do I update the firmware?
Download the latest firmware from Panduit's website. Connect the printer via USB, run the firmware update utility, and follow on-screen instructions.
Where can I find the user manual?
The manual is available for free on notice-facile.com. You can download it in PDF format from the product page.
User questions about MP75 Panduit
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual MP75 - Panduit and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MP75 by Panduit.
USER MANUAL MP75 Panduit
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Panduit
Model : MP75
Category : Printer