DBI564I.S.SOF.U - Dishwasher ASKO - Free user manual and instructions
Find the device manual for free DBI564I.S.SOF.U ASKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | ASKO |
| Model | DBI564I.S.SOF.U |
| Installation Type | Fully Integrated |
| Width | 60 cm (23.6 in) |
| Height | 86.5 cm (34.1 in) |
| Depth | 55 cm (21.7 in) |
| Weight | Approx. 40 kg (88 lb) |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Efficiency Class | A++ |
| Noise Level | 44 dB(A) |
| Place Settings | 14 |
| Number of Programs | 7 (including Eco, Intensive, Quick) |
| Drying System | Turbo Drying with Heat Exchanger |
| Water Consumption | 9.5 L per cycle (Eco) |
| Energy Consumption | 0.92 kWh per cycle (Eco) |
| Interior Material | Stainless Steel |
| Cutlery Basket | Removable, with adjustable compartment |
| Self-Cleaning Filter | Yes, with automatic cleaning cycle |
| Child Lock | Yes, available on control panel |
| Warranty | 2 years (standard), extendable |
Frequently Asked Questions - DBI564I.S.SOF.U ASKO
How do I set up the dishwasher for first use?
First, remove all packaging. Connect the water supply hose to a cold water tap (max 60°C) and the drain hose to a siphon. Plug into a grounded outlet. Add regeneration salt to the softener and rinse aid. Run a short cycle with no dishes.
What type of detergent should I use?
Use a high-quality dishwasher detergent, preferably in tablet form. For best results, pre-dissolve powder or use a 3-in-1 tablet that includes salt and rinse aid.
Why is my dishwasher not draining?
Check the drain hose for kinks or clogs. Ensure the filter is clean. Also verify that the garbage disposal (if connected) is clear. If the problem persists, there may be a pump blockage.
How often should I clean the filter?
Clean the coarse filter after each use. The fine filter should be inspected monthly and cleaned if necessary. The self-cleaning filter will automatically rinse during cycles, but manual cleaning is recommended.
What does the error code E01 mean?
Error code E01 indicates a water supply issue. Check that the water tap is fully open and the water inlet hose is not kinked. If the problem continues, contact a technician.
Can I use the dishwasher with a solar water heater?
Yes, but ensure the incoming water temperature does not exceed 60°C. Higher temperatures can damage the dishwasher's components.
How do I adjust the rinse aid setting?
Access the settings menu by pressing and holding the 'Start' button for 3 seconds. Use the program buttons to select rinse aid level (1-6). Higher settings increase dosage. Refer to manual for details.
What is the maximum load for the upper rack?
The upper rack can hold up to 12 kg (26.5 lb) of dishes. Distribute weight evenly to prevent tipping.
How do I activate the child lock?
Press and hold the 'Child Lock' button (usually indicated by a padlock icon) for 3 seconds. A light or symbol will confirm activation. To deactivate, repeat.
Can I replace the water inlet hose myself?
Yes, you can replace it with a compatible hose. Ensure the new hose has the correct fittings and is securely tightened. Use only ASKO-approved parts to avoid leaks.
User questions about DBI564I.S.SOF.U ASKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DBI564I.S.SOF.U - ASKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DBI564I.S.SOF.U by ASKO.