DBI653IB.W - Dishwasher ASKO - Free user manual and instructions
Find the device manual for free DBI653IB.W ASKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Asko |
| Model | DBI653IB.W |
| Installation Type | Built-in |
| Width | 60 cm |
| Height | 82 cm |
| Depth | 55 cm |
| Weight | 45 kg |
| Energy Efficiency Class | A+++ |
| Water Consumption per Cycle | 9 L |
| Noise Level | 44 dB |
| Number of Place Settings | 14 |
| Number of Programs | 9 |
| Key Programs | Auto, Quick, Eco, Intensive, Glass |
| Control Type | Electronic touch buttons |
| Display Type | LED display |
| Interior Light | Yes |
| Safety Lock | Child lock |
| Self-Cleaning Filter | Yes |
| Warranty | 2 years |
Frequently Asked Questions - DBI653IB.W ASKO
How to install the Asko DBI653IB.W dishwasher?
Ensure the unit is level and connect to water supply (hot or cold) and drain. Electrical connection must be grounded. Refer to the installation manual for detailed steps.
How to clean the filters?
Remove the lower spray arm and unscrew the coarse filter. Rinse under running water. Clean the fine filter with a soft brush. Reassemble.
What detergent is recommended?
Use a quality dishwasher detergent (powder, gel, or tablets) designed for automatic dishwashers. Avoid hand-washing liquids.
Why does my dishwasher not start?
Check that the door is fully closed and latched. Ensure the power supply is on and the water tap is open. Press the start button again.
Why is water not draining?
Check if the drain hose is kinked or blocked. Clean the filters and the pump impeller. If the issue persists, the drain pump may need replacement.
How to fill the salt reservoir?
Open the salt cap located at the bottom of the dishwasher. Use a funnel to pour in dishwasher salt. Fill until water overflows, then replace cap tightly.
Why are dishes not drying properly?
Ensure you use rinse aid and that the dispenser is full. Select a program with drying phase. Avoid overcrowding and leave door slightly ajar after cycle.
What do error codes mean?
Common errors: F1 (water supply), F2 (drainage), F3 (heating). Consult the manual for full list. Reset by turning off power for 1 minute.
How to reset the dishwasher?
Press and hold the start button for 5 seconds until the display shows '0'. Alternatively, turn off the unit at the wall switch for 30 seconds, then restart.
How to use the half load function?
Load only the upper or lower rack. Select the 'Half Load' option if available on your model. This adjusts water and energy consumption accordingly.
User questions about DBI653IB.W ASKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DBI653IB.W - ASKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DBI653IB.W by ASKO.