CyberPower

Smart App Online OL3000RTXL2UN - Inverter CyberPower - Free user manual and instructions

Find the device manual for free Smart App Online OL3000RTXL2UN CyberPower in PDF.

📄 21 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice CyberPower Smart App Online OL3000RTXL2UN - page 2
2 / 21
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type UPS (Uninterruptible Power Supply)
Model Smart App Online OL3000RTXL2UN
Brand CyberPower
Form Factor 2U Rackmount / Tower convertible
Dimensions (W x D x H) 17.2 x 25.6 x 3.5 inches (437 x 650 x 89 mm)
Weight 66 lbs (30 kg)
Power Rating 3000 VA / 2700 W
Input Voltage 200 - 240 VAC
Output Voltage 200/208/220/230/240 VAC
Topology Online Double Conversion
Battery Type Sealed Lead-Acid (SLA)
Typical Runtime (Half Load) 12 minutes
Display LCD status panel
Communication Ports USB, RS-232, EPO, Optional SNMP
Functions Online double conversion, automatic voltage regulation, overload protection, battery management
Maintenance & Cleaning Clean external surfaces with a dry, soft cloth; ensure ventilation is not obstructed
Safety Overload and short circuit protection; compliance with UL, CE, FCC
Spare Parts & Repairability Replaceable battery packs and cooling fans; serviceable by qualified technicians
General Rated for critical server and network equipment; supports rack or tower installation

Frequently Asked Questions - Smart App Online OL3000RTXL2UN CyberPower

What is the difference between online and standby UPS?
An online UPS like this CyberPower model continuously converts AC to DC and back to AC, providing isolation from power disturbances. A standby UPS only switches to battery when input power fails.
How long does the battery last?
The battery runtime depends on load. At half load (1350W), expect approximately 12 minutes. At full load (2700W), runtime reduces to about 4-5 minutes.
Can I monitor the UPS remotely?
Yes, via USB or RS-232 with PowerPanel software. Optional SNMP card enables network monitoring.
How do I replace the battery?
The battery is housed in a removable tray. Disconnect the UPS from mains, open the front panel, slide out the battery pack, and replace with a compatible CyberPower battery.
What devices can I connect to this UPS?
This 3000VA/2700W unit is suitable for servers, network switches, storage devices, and other critical IT equipment within its power rating.
Does it support rack mounting?
Yes, it is a 2U rackmount chassis with included rack rails. It can also be used as a tower with the optional stand.
What is the input voltage range?
The UPS accepts 200-240 VAC input. It can also output at selectable voltages: 200/208/220/230/240 VAC.
How do I perform a self-test?
Press the 'Test' button on the front panel to initiate a battery self-test. The LCD will show results or error codes.
Is the UPS maintenance-free?
The UPS is low maintenance. Keep vents clean and ensure ambient temperature below 40°C. Batteries have a typical life of 3-5 years and require periodic replacement.
What do the alarm sounds indicate?
A continuous beep typically indicates overload or fault. Intermittent beeps indicate battery mode. Consult the manual for specific alarm codes.

User questions about Smart App Online OL3000RTXL2UN CyberPower

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Inverter in PDF format for free! Find your manual Smart App Online OL3000RTXL2UN - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Smart App Online OL3000RTXL2UN by CyberPower.

USER MANUAL Smart App Online OL3000RTXL2UN CyberPower

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CyberPower

Model : Smart App Online OL3000RTXL2UN

Category : Inverter