SmartSequencer CN-1800S - Surge protector Furman - Free user manual and instructions
Find the device manual for free SmartSequencer CN-1800S Furman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Sequencer with Surge Protection |
| Brand | Furman |
| Model | SmartSequencer CN-1800S |
| Dimensions (W x D x H) | 19 x 10.5 x 1.75 inches (rack unit) |
| Weight | Approximately 10 lbs |
| Input Voltage | 120 VAC, 60 Hz |
| Maximum Current | 15 Amps |
| Power Capacity | 1800 VA |
| Number of Outlets | 8 Sequenced Outlets (rear) + 1 Front Panel Outlet |
| Sequencing Type | Programmable Startup and Shutdown Sequence |
| Sequence Delay | Adjustable per outlet (1-15 seconds) |
| Surge Protection Rating | Ultra-low MOV clamping voltage, > 2,500 J |
| RFI/EMI Filtering | Linear filtering technology, > 20 dB at 100 kHz |
| Indicator Lights | Power On, Sequence Active, Fault (UV, OV, CC) |
| Protection Features | Over/Under Voltage, Current Overload, Extreme Voltage Shutdown |
| Rack Mountable | Yes, 1U with included hardware |
| Warranty | 5 years limited warranty plus $1,000,000 connected equipment warranty |
| Certifications | ETL Listed, cULus, RoHS |
Frequently Asked Questions - SmartSequencer CN-1800S Furman
How do I set the sequence delay for each outlet?
Use the rotary switches on the rear panel to set delay times (1-15 seconds) for each of the 8 sequenced outlets. Turn the switch clockwise to increase delay.
Can I bypass the sequencing for certain outlets?
Yes, any outlet can be set to 'Always On' by turning its delay switch to the 'On' position. This keeps the outlet powered even during shutdown sequence.
What does the Fault indicator mean?
The Fault LED illuminates if the unit detects an overvoltage (>140V), undervoltage (<95V), or current overload (>15A). The unit will then shut down all outlets to protect connected equipment.
How do I perform a manual reset after a fault?
Turn the front panel power switch off, wait 10 seconds, then turn it back on. The sequence will restart if the fault condition has been resolved.
What type of surge protection does the CN-1800S provide?
It uses Furman's Ultra-Low MOV Clamping surge suppression with a rating of over 2,500 Joules, ensuring fast response to voltage spikes.
Can I mount this unit in a standard 19-inch rack?
Yes, it is 1U rack-mountable. Included rack ears and screws allow installation in any standard server rack.
What is the maximum load I can connect?
The total current draw should not exceed 15 Amps (1800 VA at 120V). Ensure all connected equipment sum to this limit.
How do I clean and maintain the unit?
Unplug the unit from AC power. Use a dry, lint-free cloth to wipe the exterior. Do not use liquids or sprays. Check ventilation vents for dust buildup.
Is the CN-1800S compatible with 230V systems?
No, this model is designed for 120V, 60Hz systems only. Using it with different voltages may cause damage and void warranty.
What does the $1,000,000 connected equipment warranty cover?
Furman will repair or replace connected equipment damaged by a power surge while properly connected to the CN-1800S, up to $1,000,000 total. Terms apply.
User questions about SmartSequencer CN-1800S Furman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surge protector in PDF format for free! Find your manual SmartSequencer CN-1800S - Furman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SmartSequencer CN-1800S by Furman.
USER MANUAL SmartSequencer CN-1800S Furman
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Furman
Model : SmartSequencer CN-1800S
Category : Surge protector