DIN28428 - Dishwasher BEKO - Free user manual and instructions
Find the device manual for free DIN28428 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Beko |
| Model | DIN28428 |
| Energy Class | A++ |
| Noise Level | 46 dB |
| Capacity | 13 place settings |
| Dimensions (H × W × D) | 845 × 598 × 600 mm |
| Weight | 45 kg |
| Power Consumption (per cycle) | 0.9 kWh |
| Water Consumption (per cycle) | 9.5 L |
| Number of Programs | 6 |
| Typical Program Duration (Eco) | 3 hours 40 minutes |
| Drying Efficiency | A |
| Safety Features | Child lock, overflow protection, anti-flood |
| Maintenance | Clean filters regularly, check spray arms for blockages |
| Spare Parts Availability | Yes, genuine Beko parts through authorized service |
| Installation Type | Built-in |
| Special Features | Half load, delay timer, LED display |
| Water Connection | Cold water only |
| Electrical Supply | 220-240V, 50/60Hz, 10A |
Frequently Asked Questions - DIN28428 BEKO
How do I start a wash cycle on the Beko DIN28428 dishwasher?
To start a wash cycle, load the dishwasher, add detergent, select a program using the program selector knob, and press the Start/Reset button. The machine will begin after a few seconds.
What does the 'Eco' program do and how long does it take?
The Eco program is designed to clean normally soiled dishes using less energy and water. It typically runs for about 3 hours 40 minutes and is the most efficient cycle for everyday use.
How should I load dishes for best cleaning results?
Place larger items like pots and pans on the bottom rack, facing downwards. Put plates and smaller items on the top rack. Ensure water spray can reach all surfaces and avoid blocking the spray arms.
Why is my dishwasher not draining properly?
Check the filter for blockages and clean it. Also inspect the drain hose for kinks or clogs. Make sure the sink trap is not blocked if the dishwasher drains into the sink.
How do I clean the filter of the Beko DIN28428?
Remove the lower rack and unscrew the cylindrical filter at the bottom of the dishwasher. Rinse it under running water and scrub gently with a soft brush. Reassemble it securely.
Can I use regular dish soap instead of dishwasher detergent?
No, never use regular dish soap as it creates excessive suds and can damage the dishwasher. Always use a dishwasher detergent specifically designed for automatic dishwashers.
The dishwasher shows an error code. What should I do?
Note the error code and consult the user manual's troubleshooting section. Common codes indicate water inlet issues, draining problems, or heating faults. If the issue persists, contact Beko service.
How can I reduce the noise level of my dishwasher?
Ensure the dishwasher is level and not touching surrounding cabinets. Avoid overloading and use programs with lower noise, such as the Eco or Quiet programs if available.
What is the recommended maintenance schedule?
Clean the filter every month, check the spray arms for blockages, and run a dishwasher cleaner cycle every 3 months to remove grease and scale buildup.
How do I enable the child lock feature?
Press and hold the Child Lock button (usually marked with a key icon) for 3 seconds until the indicator lights up. The lock prevents accidental button presses during operation. Repeat to disable.
User questions about DIN28428 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DIN28428 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DIN28428 by BEKO.
USER MANUAL DIN28428 BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : DIN28428
Category : Dishwasher