I-LIGHT-SNR11TY - Motion detector Techly - Free user manual and instructions
Find the device manual for free I-LIGHT-SNR11TY Techly in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | Techly |
| Model | I-LIGHT-SNR11TY |
| Detection Method | Passive Infrared (PIR) |
| Detection Range | Up to 12 meters |
| Detection Angle | 120 degrees |
| Power Supply | 12V DC or 9V battery |
| Operating Temperature | -10°C to 40°C |
| Dimensions (approx.) | 100 x 80 x 60 mm |
| Weight (approx.) | 150 g |
| Installation Method | Wall or ceiling mount |
| Adjustable Sensitivity | Yes |
| Time Delay Adjustment | 10 seconds to 5 minutes |
| Lux Control (Day/Night) | Adjustable light threshold |
| Indicator Light | Red LED for detection |
| Weather Resistance | Indoor use only |
| Material | ABS plastic |
| Mounting Hardware | Included |
| Certifications | CE, RoHS |
| Maintenance | Clean lens with soft cloth; check battery annually |
| Safety | Use only specified power; do not expose to water |
| Spare Parts Availability | Contact Techly support |
Frequently Asked Questions - I-LIGHT-SNR11TY Techly
How do I install the motion detector?
Mount the device on a wall or ceiling at a height of 2-3 meters using the included screws and anchors. Ensure the detection area is free of obstructions. Connect to power as per the manual.
What is the detection range and angle?
The detector has a range of up to 12 meters and a detection angle of 120 degrees. Optimal performance is achieved when the subject moves across the detection pattern.
How do I adjust the sensitivity?
Locate the sensitivity potentiometer on the device. Turn it clockwise to increase sensitivity or counterclockwise to decrease. Test and adjust until desired response is achieved.
Can I use this outdoors?
No, the I-LIGHT-SNR11TY is designed for indoor use only. Exposure to rain or moisture may damage the unit.
What type of battery does it use?
It can be powered by a 9V alkaline battery or a 12V DC power supply. The battery compartment is located at the back.
How do I set the light threshold (day/night mode)?
Use the LUX control knob to set the ambient light level at which the detector should activate. Turn to the sun symbol for daytime operation or to the moon symbol for nighttime only.
Why does the detector not detect movement?
Check the power supply, ensure the sensitivity is not too low, and verify the detection area is clear. Also check that the ambient light setting is appropriate.
How do I change the time delay?
Adjust the TIME potentiometer to set the duration the output stays active after detection. Turn clockwise for longer delays (up to 5 minutes) and counterclockwise for shorter (minimum 10 seconds).
Is the detector compatible with smart home systems?
No, this model is a standalone motion detector and does not have smart home connectivity. It can be used to trigger a light or alarm via its relay output.
How to clean and maintain the detector?
Power off the device before cleaning. Wipe the lens gently with a dry, soft cloth. Do not use water or solvents. Replace battery once a year or when the detection becomes unreliable.
User questions about I-LIGHT-SNR11TY Techly
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual I-LIGHT-SNR11TY - Techly and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. I-LIGHT-SNR11TY by Techly.
USER MANUAL I-LIGHT-SNR11TY Techly
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Techly
Model : I-LIGHT-SNR11TY
Category : Motion detector