Cobalt CO104SBX - Subwoofer ORION - Free user manual and instructions
Find the device manual for free Cobalt CO104SBX ORION in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Subwoofer (Passive) |
| Model | Orion Cobalt CO104SBX |
| Size | 10 inches (250 mm) |
| Impedance | 4 ohms |
| Power Handling (RMS) | 300 Watts |
| Power Handling (Peak) | 600 Watts |
| Frequency Response | 25 - 500 Hz |
| Sensitivity | 90 dB |
| Surround Material | Rubber |
| Cone Material | Polypropylene |
| Magnet Type | Ferrite |
| Voice Coil Size | 2 inches (50 mm) |
| Mounting Depth | 5.5 inches (140 mm) |
| Cutout Diameter | 9.25 inches (235 mm) |
| Recommended Enclosure | Sealed: 0.8-1.2 cu. ft.; Ported: 1.5-2.0 cu. ft. |
| Overall Dimensions | 12.5 x 12.5 x 6.5 inches |
| Net Weight | 5.5 kg (12.1 lbs) |
| Mounting Hardware Included | Yes (screws, gasket) |
| Cleaning Instructions | Wipe with a dry, soft cloth; avoid liquids |
| Safety Note | Do not exceed rated power; keep away from moisture |
| Repairability | Contact Orion support for service |
Frequently Asked Questions - Cobalt CO104SBX ORION
What is the impedance of the Orion Cobalt CO104SBX subwoofer?
The subwoofer is a 4-ohm model, making it suitable for most car audio amplifiers.
What type of enclosure should I use for this subwoofer?
It works well in both sealed and ported boxes. For sealed, use 0.8-1.2 cu. ft.; for ported, 1.5-2.0 cu. ft. with a 4-inch port.
What is the recommended amplifier power?
An amp delivering 200-400 Watts RMS at 4 ohms is ideal to get the best performance without damage.
How do I wire the subwoofer to my amplifier?
Connect the positive terminal of the sub to the positive output of the amp, and negative to negative. For multiple subs, ensure the final impedance matches the amp's rating.
What are the mounting depth and cutout dimensions?
Mounting depth is 5.5 inches (140 mm) and cutout diameter is 9.25 inches (235 mm). Ensure sufficient clearance in your box.
What is the frequency response of this subwoofer?
The frequency response is 25-500 Hz, with strong low-frequency extension suitable for deep bass.
Is the Orion Cobalt CO104SBX a good subwoofer for car audio?
Yes, it offers a good balance of power handling, sensitivity, and build quality for entry-level to mid-range systems.
How should I clean and maintain the subwoofer?
Gently dust the cone and surround with a soft, dry cloth. Avoid water or cleaning agents that could damage the materials.
What should I do if the subwoofer sounds distorted?
Check that the amplifier gain is not too high, the enclosure is properly sealed, and the subwoofer is not receiving more power than its RMS rating.
Where can I find replacement parts or service?
Contact Orion customer support or an authorized dealer for recone kits or repairs. Do not attempt to disassemble the speaker yourself.
User questions about Cobalt CO104SBX ORION
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Cobalt CO104SBX - ORION and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Cobalt CO104SBX by ORION.
USER MANUAL Cobalt CO104SBX ORION
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ORION
Model : Cobalt CO104SBX
Category : Subwoofer