PWMA200 - Loudspeaker Pyle - Free user manual and instructions
Find the device manual for free PWMA200 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered PA Speaker |
| Brand | Pyle |
| Model | PWMA200 |
| Dimensions (H x W x D) | 14.2 x 11.0 x 12.4 inches |
| Weight | 19.8 lbs |
| Power Output | 200W Peak / 100W RMS |
| Frequency Response | 50 Hz – 20 kHz |
| Woofer | 12" low-frequency driver |
| Tweeter | 1" compression driver |
| Impedance | 4 ohms |
| Inputs | XLR, 1/4" TRS, RCA, Bluetooth |
| Outputs | XLR link output |
| Bluetooth | Yes, v5.0 |
| Mounting | Standard 35mm pole mount |
| Enclosure | Plywood with carpet covering |
| Grille | Perforated steel |
| Power Supply | AC 110-240V, 50/60Hz |
| Amplifier Class | Class D |
| Protection | Short circuit, thermal overload |
| Usage | Indoor/outdoor, portable PA |
| Included Accessories | Power cord, user manual |
Frequently Asked Questions - PWMA200 Pyle
How do I connect a microphone?
Connect a dynamic microphone to one of the XLR or 1/4" TRS inputs on the rear panel. Adjust the corresponding volume control.
How do I pair via Bluetooth?
Enable Bluetooth on your device, select "Pyle PWMA200" from the list. The speaker will confirm with an audio tone. Bluetooth v5.0 provides stable wireless streaming.
What power cable do I need?
Use the included AC power cord with a standard IEC C13 connector. The speaker operates on 110-240V AC, 50/60Hz.
Can I use this outdoors?
Yes, the PWMA200 is designed for both indoor and outdoor use. However, avoid exposing it to rain or extreme moisture. The enclosure is carpet-covered plywood for durability.
How do I clean the grille?
Use a soft brush or vacuum with a brush attachment to remove dust from the perforated steel grille. For stubborn dirt, lightly dampen a cloth with water and mild soap. Do not use solvents.
What is the maximum power?
The speaker delivers 200W peak and 100W RMS of power through its built-in Class D amplifier.
Does it have a built-in amplifier?
Yes, it is a powered speaker with an integrated Class D amplifier. No external amplifier is required.
Can I mount it on a speaker stand?
Yes, the bottom features a 35mm pole mount socket for standard speaker stands. Ensure the stand is rated for the speaker's weight.
Is there a warranty?
Pyle typically offers a 1-year limited warranty on this product. Keep your receipt and register online for coverage details.
How to adjust volume?
Use the volume knob on the front panel or the volume controls for each input channel (Mic/Line). Also, adjust the source volume on your connected device.
User questions about PWMA200 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PWMA200 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PWMA200 by Pyle.
USER MANUAL PWMA200 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PWMA200
Category : Loudspeaker