PRETRAMP50 - Loudspeaker Pyle - Free user manual and instructions
Find the device manual for free PRETRAMP50 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable PA System |
| Model | PRETRAMP50 |
| Brand | Pyle |
| Power Output | 50 Watts RMS |
| Speaker Configuration | 2-way with 8" woofer and tweeter |
| Connectivity | Bluetooth, USB, SD Card, FM Radio |
| Inputs | 1/4" microphone input, 3.5mm AUX |
| Outputs | 1/4" speaker output |
| Control | Knobs for volume, echo, and tone; button panel |
| Power Supply | AC 110-240V, 50/60Hz or internal rechargeable battery |
| Battery Life | Up to 6 hours at moderate volume |
| Dimensions (W x H x D) | 12.2 x 18.5 x 10.6 inches |
| Weight | 16.5 lbs |
| Material | ABS plastic with metal grille |
| Color | Black |
| Included Accessories | Wireless microphone, remote control, power cord, user manual |
| Maintenance | Wipe with a soft, dry cloth; avoid liquid cleaners |
| Storage | Keep in a cool, dry place away from direct sunlight |
| Safety | Do not expose to rain or moisture; unplug during storms |
| Spare Parts | Contact Pyle for replacement parts (battery, power cord, microphones) |
Frequently Asked Questions - PRETRAMP50 Pyle
How do I pair my phone via Bluetooth?
Turn on the speaker. Press the Bluetooth button to enter pairing mode. On your phone, search for devices and select 'Pyle PRETRAMP50'. If prompted, enter PIN 0000.
Can I use it while charging?
Yes, the speaker can be used while plugged into AC power. The internal battery will charge simultaneously.
How do I connect a microphone?
Plug a standard 1/4-inch microphone into the MIC IN jack. Use the VOLUME and ECHO knobs to adjust levels.
What type of USB and SD cards are supported?
The speaker supports USB flash drives and SD/SDHC cards up to 32GB formatted in FAT32. It can play MP3 and WMA files.
How do I set up the FM radio?
Press the MODE button until 'FM' appears. Extend the built-in antenna for better reception. Use the SCAN button to auto-scan and save stations.
Why is there no sound?
Check that the speaker is powered on and volume is turned up. Ensure the correct input mode is selected. If using Bluetooth, verify the device is connected.
How long does the battery last?
The internal rechargeable battery lasts up to 6 hours at moderate volume levels. Full charge takes about 4-5 hours.
Can I connect two speakers together?
This model does not support daisy-chaining or wireless pairing with another speaker. It operates as a standalone unit.
How do I reset the speaker?
Turn off the speaker, disconnect power, and remove any USB/SD media. Wait 30 seconds, then power back on. If issues persist, contact Pyle support.
Is the speaker waterproof?
No, the Pyle PRETRAMP50 is not waterproof. It is designed for indoor/dry outdoor use. Avoid exposure to rain or splashes.
User questions about PRETRAMP50 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PRETRAMP50 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRETRAMP50 by Pyle.
USER MANUAL PRETRAMP50 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PRETRAMP50
Category : Loudspeaker