Pyle

PT250BA - Receiver Pyle - Free user manual and instructions

Find the device manual for free PT250BA Pyle in PDF.

📄 8 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Pyle PT250BA - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Type Stereo Receiver
Brand Pyle
Model PT250BA
Power Output 250 Watts per channel (RMS)
Impedance 4-8 Ohms
Bluetooth Version Bluetooth 5.0 with aptX
FM Tuner Built-in with digital display
Audio Inputs 3x RCA, 1x 3.5mm AUX, 1x optical
Audio Outputs 2x speaker binding posts, 1x subwoofer pre-out
Dimensions (W x H x D) 17.2 x 3.5 x 10.6 inches
Weight 9.8 lbs
Power Supply 120V AC, 60Hz
Remote Control Included
Front Panel Display LED with FM frequency and input selection
Headphone Jack Yes, 1/4 inch
Cooling Ventilated chassis with fan
Material Metal chassis with brushed aluminum front
Maintenance Wipe with dry cloth; do not use solvents
Safety Do not open, keep away from moisture, unplug during storms
Spare Parts Generic replacement parts available online

Frequently Asked Questions - PT250BA Pyle

How do I pair my phone via Bluetooth?
Press the Bluetooth button on the front panel or remote. The display will flash 'BT'. On your phone, search for 'Pyle PT250BA' and select it. Enter PIN 0000 if prompted.
What is the maximum power output?
The receiver delivers 250 watts per channel RMS into 4 ohms, or 150 watts into 8 ohms.
Can I use this receiver with passive speakers?
Yes, it has binding post speaker outputs for bare wire, banana plugs, or spade connectors. Ensure impedance is between 4 and 8 ohms.
How do I connect a TV or DVD player?
Use an RCA cable from the TV's audio output to an AUX input on the receiver. Alternatively, use a 3.5mm to RCA adapter for headphone jacks.
Why is there no sound from the speakers?
Check that the speaker wires are properly connected, the receiver is not muted, and the correct input is selected. Also verify the volume is turned up.
How do I reset the receiver?
Unplug the unit for 30 seconds, then plug it back in. This clears temporary glitches.
Does it support FM radio?
Yes, it has a built-in FM tuner with digital display. Connect the included wire antenna for better reception.
Can I add a subwoofer?
Yes, use the subwoofer pre-out (RCA) on the rear panel to connect a powered subwoofer.
What is the warranty?
Pyle offers a 1-year limited warranty covering defects in materials and workmanship. Register online for details.
How do I clean the receiver?
Wipe the exterior with a soft, dry cloth. Do not use chemical cleaners or spray liquids directly onto the unit.

User questions about PT250BA Pyle

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Receiver in PDF format for free! Find your manual PT250BA - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PT250BA by Pyle.

USER MANUAL PT250BA Pyle

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Pyle

Model : PT250BA

Category : Receiver