INV139A - Receiver Pyle - Free user manual and instructions
Find the device manual for free INV139A Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Home Theater Receiver |
| Brand | Pyle |
| Model | INV139A |
| Dimensions (W x H x D) | 17.2 x 5.9 x 12.6 inches |
| Weight | 8.6 lbs |
| Power Output | 100W per channel (4-8 ohms) |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | 80 dB |
| Amplifier Class | Class AB |
| Bluetooth Version | 5.0 |
| Supported Audio Formats | MP3, WMA, WAV |
| Radio Bands | AM/FM |
| Number of Channels | 2.0 (Stereo) |
| Input Connectivity | RCA, 3.5mm, USB, FM Antenna |
| Remote Control | Included (batteries required) |
| Power Supply | 110/220V AC, 50/60 Hz |
| Material | Metal chassis with plastic front panel |
| Color | Black |
| Maintenance | Clean with dry, soft cloth. Avoid moisture. |
| Safety | Operate in well-ventilated area; do not expose to rain or humidity. |
| Spare Parts & Repairability | Contact Pyle customer service for replacement parts. |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - INV139A Pyle
How do I pair my device via Bluetooth?
Press the 'Bluetooth' button on the receiver or remote. Ensure your device's Bluetooth is on and select 'Pyle INV139A' from the list. Once connected, the indicator will stop flashing.
How can I reset the receiver?
Disconnect the power cord for 10 seconds, then reconnect. For factory reset, hold the 'Power' button for 5 seconds while the unit is off.
How do I connect speakers?
Use speaker wire to connect the receiver's speaker terminals to your speakers. Match positive (+) to positive and negative (-) to negative. Ensure impedance is 4-8 ohms.
How do I use the FM radio?
Connect the included FM antenna. Press 'Tuner' button to select FM. Use 'Tune +/-' buttons to search stations. Press 'Memory' to save presets.
No sound from speakers, what should I check?
Verify speakers are connected properly, volume is turned up, and source is selected. Ensure mute is off. Check if the unit is in standby mode.
The remote is not working, what can I do?
Replace the batteries with fresh ones. Ensure there is a clear line of sight to the receiver. If still not working, try resetting the remote by removing batteries for 1 minute.
Can I play music from a USB drive?
Yes, insert a USB drive with MP3, WMA, or WAV files. Press 'USB' mode and use the controls to navigate folders and play tracks.
The receiver won't turn on, what now?
Check the power cord connection and the wall outlet. Ensure the voltage selector matches your region (110V or 220V). Try a different outlet.
How do I clean the receiver?
Unplug the unit. Use a dry, soft cloth to wipe the exterior. Do not use any liquids or abrasive cleaners. Ensure vents are free from dust.
What is the recommended setup procedure?
Place the receiver on a stable, ventilated surface. Connect speakers, antenna, and source devices. Plug into power and turn on. Select the desired input mode and adjust volume.
User questions about INV139A Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual INV139A - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. INV139A by Pyle.
USER MANUAL INV139A Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : INV139A
Category : Receiver