GN32C - Screen Viotek - Free user manual and instructions
Find the device manual for free GN32C Viotek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monitor |
| Brand | Viotek |
| Model | GN32C |
| Screen Size | 32 inches |
| Resolution | 2560 x 1440 (QHD) |
| Refresh Rate | 144 Hz |
| Response Time | 1 ms (MPRT) |
| Panel Type | VA (Vertical Alignment) |
| Curvature | 1800R |
| Aspect Ratio | 16:9 |
| Brightness | 350 cd/m² |
| Contrast Ratio | 3000:1 (Static) |
| Viewing Angles | 178° / 178° |
| Color Support | 16.7 Million Colors |
| Input Ports | DisplayPort 1.2, HDMI 2.0 x 2 |
| Audio | 3.5mm Headphone Jack |
| VESA Mount | 100 x 100 mm |
| Adjustability | Tilt (-5° to 15°) |
| Power Consumption | 50W (Typical) |
| Dimensions (with Stand) | 28.1 x 20.8 x 10.5 inches |
| Weight (with Stand) | 16.5 lbs |
| Cleaning | Use a soft, dry microfiber cloth. Do not use liquid cleaners. |
| Safety | Keep away from heat sources. Do not open the monitor casing. |
| Spare Parts | Contact Viotek support for replacement stand or power adapter. |
| Repair Information | Refer to qualified service personnel for repairs. No user-serviceable parts inside. |
Frequently Asked Questions - GN32C Viotek
How do I set up the Viotek GN32C monitor?
Connect the monitor to your PC using DisplayPort or HDMI. Plug in the power adapter, then press the power button. Adjust settings using the OSD joystick.
What is the best resolution and refresh rate for the GN32C?
The native resolution is 2560 x 1440 at 144 Hz. Ensure you use a high-quality DisplayPort cable to achieve 144 Hz. HDMI may be limited to lower refresh rates.
Can I use VESA mount with this monitor?
Yes, the monitor supports 100 x 100 mm VESA mounting. You will need to remove the stand and use appropriate screws (usually M4).
How do I enable FreeSync or G-Sync?
FreeSync is supported over DisplayPort. Enable it in the OSD menu under 'Game' settings. For G-Sync, you must have a compatible NVIDIA GPU and enable G-Sync in NVIDIA Control Panel.
Why is my screen flickering or showing artifacts?
Check your cable connection, ensure the cable supports the resolution and refresh rate. Try a different port or cable. If the issue persists, reset the monitor to factory settings via OSD.
How do I clean the screen safely?
Power off the monitor and unplug it. Use a soft, dry microfiber cloth to gently wipe the screen. Do not use paper towels, alcohol, or any liquid cleaners.
What are the OSD controls and how do I navigate?
The monitor uses a single joystick at the bottom right. Press to open the menu, move up/down/left/right to navigate, and press again to confirm. Use it to adjust brightness, contrast, input source, and more.
Does the monitor have built-in speakers?
No, the Viotek GN32C does not have built-in speakers. It includes a 3.5mm headphone jack for audio output.
What should I do if one pixel is stuck or dead?
Stuck pixels may be resolved by gently massaging the area or using a pixel-fixing video. For dead pixels (always black), check the warranty policy; many manufacturers cover a minimum number of dead pixels.
How do I adjust the height or swivel of the stand?
The original stand offers only tilt adjustment (-5° to 15°). Height and swivel adjustments are not available. For ergonomic adjustments, consider using a VESA arm.
User questions about GN32C Viotek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screen in PDF format for free! Find your manual GN32C - Viotek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GN32C by Viotek.
USER MANUAL GN32C Viotek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Viotek
Model : GN32C
Category : Screen