PP-22 - Receiver Polsen - Free user manual and instructions
Find the device manual for free PP-22 Polsen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Receiver |
| Model | PP-22 |
| Brand | Polsen |
| Dimensions (W x H x D) | 430 x 150 x 300 mm |
| Weight | 5.0 kg |
| Power Supply | 120V AC, 50/60Hz |
| Power Consumption | 200W (max) |
| Standby Power | < 0.5W |
| Audio Channels | 5.1 channels |
| Amplifier Output | 100W per channel (8 ohms) |
| Frequency Response | 20 Hz - 20 kHz (±1 dB) |
| Total Harmonic Distortion | < 0.05% |
| Signal-to-Noise Ratio | > 95 dB |
| Inputs | 4x HDMI, 2x Optical, 2x Coaxial, 3x RCA, 1x USB |
| Outputs | 1x HDMI (ARC), 1x Subwoofer, 2x Speaker (banana plugs) |
| Radio Tuner | AM/FM with 30 presets |
| Bluetooth | Yes, version 4.2 |
| Supported Audio Formats | MP3, WMA, AAC, FLAC, WAV |
| Remote Control | Included (IR) |
| Display | LED dot matrix |
| Cabinet Material | Aluminum front panel, steel chassis |
| Operating Temperature | 0°C - 40°C |
| Warranty | 1 year limited |
Frequently Asked Questions - PP-22 Polsen
How do I connect my TV to the PP-22 receiver?
Use an HDMI cable from your TV's HDMI ARC port to the receiver's HDMI ARC output. Ensure both devices support ARC.
Can I use the receiver without a subwoofer?
Yes, the receiver will output bass to the front speakers if no subwoofer is connected. You can adjust crossover settings in the menu.
How do I reset the receiver to factory settings?
Press and hold the 'Power' button while turning on the unit. Alternatively, navigate to 'Setup > Factory Reset' in the on-screen menu.
Why is there no sound from my speakers?
Check that speakers are properly connected to the correct terminals and that the impedance matches. Also ensure the receiver is set to the correct input source and volume is turned up.
How do I pair my Bluetooth device?
Press the 'Bluetooth' button on the remote or front panel. On your device, search for 'Polsen PP-22' and select it. Enter '0000' if prompted.
Can I control the receiver with a universal remote?
Yes, the receiver uses standard IR codes. You can program a universal remote by searching for code 1234 or using the learning function.
What is the maximum power output per channel?
The receiver delivers 100W per channel (8 ohms, 1kHz, 0.1% THD). For 4 ohm speakers, output is 150W per channel.
How do I update the firmware?
Firmware updates are done via USB. Download the latest firmware from the Polsen website, copy it to a FAT32 USB drive, insert into the USB port, and follow on-screen instructions.
Does the receiver support Dolby Atmos?
No, the PP-22 supports Dolby Digital and DTS, but not Dolby Atmos. It is a 5.1 channel receiver.
What should I do if the remote control stops working?
Replace the batteries with new CR2032 or AA as specified. If still not working, check for obstructions and ensure the receiver's IR sensor is not blocked. You can also use the front panel buttons.
User questions about PP-22 Polsen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PP-22 - Polsen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PP-22 by Polsen.
USER MANUAL PP-22 Polsen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Polsen
Model : PP-22
Category : Receiver