5536 - Heating Lasko - Free user manual and instructions
Find the device manual for free 5536 Lasko in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ceramic Tower Heater |
| Brand | Lasko |
| Model | 5536 |
| Dimensions (H x W x D) | 24.0 x 9.5 x 9.5 inches |
| Weight | 8.0 lbs |
| Power Source | 120 V, 60 Hz AC |
| Power Consumption | 1500 W (max) |
| Heat Settings | High (1500W), Low (750W), Fan Only |
| Thermostat | Adjustable thermostat with auto shut-off |
| Oscillation | Wide-area oscillation (70 degrees) |
| Remote Control | Full-function remote control included |
| Timer | Programmable timer up to 8 hours |
| Safety Features | Overheat protection, cool-touch housing, tip-over auto shut-off, ETL listed |
| Filter | Washable mesh filter |
| Cleaning | Unplug and wipe with damp cloth; clean filter monthly |
| Warranty | 3-year limited warranty |
| Noise Level | Quiet operation (approximately 45 dB on low) |
| Room Coverage | Up to 300 sq. ft. |
Frequently Asked Questions - 5536 Lasko
How do I set the timer on my Lasko 5536 heater?
Press the Timer button on the remote or unit to cycle through options from 1 to 8 hours. The display will show the selected time, and the heater will automatically shut off after that period.
What does the 'Fan Only' setting do?
The Fan Only mode circulates air without heating. It can be used year-round to improve air circulation or to cool you down in mild weather.
Is the Lasko 5536 safe to leave unattended?
Yes, it includes overheat protection and a tip-over shut-off feature. However, as with any heater, we recommend turning it off when leaving the room or sleeping.
How do I clean the filter?
Unplug the heater. Locate the filter at the back, remove it, and wash with mild soap and water. Let it dry completely before reinstalling. Clean monthly for optimal performance.
Does the remote control require batteries?
Yes, the remote uses two AAA batteries (not included). Open the compartment on the back of the remote to install.
Why does the heater turn off intermittently?
This is likely the thermostat cycling to maintain set temperature. If it turns off and does not restart, check for obstructions or overheating. If persistent, contact customer service.
Can I use an extension cord?
Lasko recommends plugging directly into a wall outlet. If necessary, use a 14 AWG or heavier extension cord and ensure it is rated for 1500W. Do not use a damaged cord.
What is the maximum room size for this heater?
The Lasko 5536 can heat rooms up to 300 square feet, making it suitable for bedrooms, living rooms, and offices.
How do I reset the heater after a safety shut-off?
Unplug the heater, wait 10 minutes for it to cool down. Plug it back in and press the Power button. Ensure vents are not blocked.
What does the oscillating feature do?
The heater will rotate side-to-side to distribute warm air evenly across the room. You can toggle oscillation on/off via the remote or unit.
User questions about 5536 Lasko
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual 5536 - Lasko and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5536 by Lasko.
USER MANUAL 5536 Lasko
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lasko
Model : 5536
Category : Heating