CW100 - Heating Lasko - Free user manual and instructions
Find the device manual for free CW100 Lasko in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Ceramic Tower Heater |
| Brand | Lasko |
| Model | CW100 |
| Dimensions (H x W x D) | Approx. 10 x 7 x 7 in. (25.4 x 17.8 x 17.8 cm) |
| Weight | Approx. 4.5 lbs (2.0 kg) |
| Power Source | 120V AC, 60Hz |
| Wattage | 1500W (max heat), 750W (low heat) |
| Heating Element | Ceramic |
| Fan Speeds | High / Low |
| Thermostat | Adjustable thermostat control |
| Oscillation | Wide-area oscillation |
| Remote Control | Yes, included |
| Safety Features | Tip-over auto shut-off; overheat protection; cool-touch housing |
| Filter | Washable dust filter |
| Cleaning & Maintenance | Unplug and wipe exterior with damp cloth; clean filter regularly |
| Certifications | ETL listed |
| Warranty | 1-year limited |
Frequently Asked Questions - CW100 Lasko
How do I set the thermostat on my Lasko CW100?
Turn the thermostat dial clockwise to increase the desired temperature and counterclockwise to decrease. The heater will automatically cycle on/off to maintain the set temperature.
Can I use the CW100 in a bathroom?
The CW100 is not rated for bathroom use. It should be kept away from water and moisture to avoid electrical shock. Use only in dry indoor areas.
How do I clean the filter?
Unplug the heater, remove the filter cover, take out the filter, and wash it with mild soap and water. Let it dry completely before reinstalling. Clean monthly for optimal performance.
Does the CW100 oscillate?
Yes, the CW100 features wide-area oscillation to distribute heat more evenly. Use the oscillation button on the control panel or remote to turn it on/off.
Why does my heater keep turning off?
The heater may have activated the tip-over or overheat protection. Ensure it is placed on a level, stable surface and that the air intake and outlet are not blocked. If overheating, let it cool down for 10-15 minutes before restarting.
Can I leave the heater unattended overnight?
It is recommended to never leave any heater unattended while sleeping. Always turn off and unplug when not in use. The CW100 has safety features but caution is advised.
Does the remote control require batteries?
Yes, the remote control uses two AAA batteries (not included). Replace them when the range becomes limited.
What is the maximum coverage area?
The CW100 is designed for spot heating or small rooms up to 150 sq. ft. (14 sq. m). For larger areas, use multiple heaters or a higher-capacity model.
How do I reset the overheat protection?
Turn off the heater, unplug it, and let it cool for at least 15 minutes. Plug it back in and turn it on. The heater will resume normal operation.
Is the Lasko CW100 energy efficient?
Ceramic heaters like the CW100 are efficient for spot heating. Using the low heat setting (750W) reduces energy consumption. However, it is not a whole-house solution.
User questions about CW100 Lasko
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual CW100 - Lasko and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CW100 by Lasko.
USER MANUAL CW100 Lasko
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lasko
Model : CW100
Category : Heating