ACAC10061 - Uncategorized APC - Free user manual and instructions
Find the device manual for free ACAC10061 APC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Uninterruptible Power Supply (UPS) |
| Typical Capacity | 1000 VA / 700 W |
| Dimensions (H x W x D) | 300 x 200 x 400 mm |
| Weight | 12 kg |
| Input Voltage | 230 V |
| Output Voltage | 230 V (regulated) |
| Battery Type | Sealed lead-acid |
| Battery Runtime | 10 minutes at full load |
| Recharge Time | 8 hours |
| Surge Protection | Yes, with RJ45/coax protection |
| Noise Level | < 40 dBA |
| Operating Temperature | 0 - 40 °C |
| Certifications | CE, UL |
| Color | Black |
| Maintenance | Clean with a dry cloth; replace battery every 3-5 years |
| Spare Parts | Replacement battery pack available |
Frequently Asked Questions - ACAC10061 APC
How do I replace the battery in my APC ACAC10061 UPS?
Turn off the UPS and unplug it. Open the battery compartment, disconnect the old battery, and insert a new sealed lead-acid battery of the same specification. Close the compartment and recharge for at least 8 hours before use.
What loads can the APC ACAC10061 support?
The UPS provides 700 W of output. It can support devices like computers, monitors, and networking equipment. Do not exceed 700 W to avoid overload.
How long does the battery last on a full charge?
At full load (700 W), the runtime is approximately 10 minutes. At half load, runtime extends to about 20 minutes.
Does the UPS protect against power surges?
Yes, the APC ACAC10061 includes surge protection for electrical lines, and also for RJ45 and coaxial connections.
Is the UPS compatible with a generator?
Yes, but the generator must provide a stable voltage and frequency. The UPS may switch to battery if the generator output is unstable.
How often should I replace the battery?
Typically every 3 to 5 years, depending on usage and ambient temperature. The UPS may indicate battery replacement with a flashing LED or alarm.
Can I connect multiple power strips to the UPS?
It is not recommended to connect power strips or daisy-chain UPS outputs. Plug only critical devices directly into the UPS to avoid overloading.
Why does the UPS emit a beeping sound?
A steady beep indicates battery mode (power failure). A rapid beep warns of low battery. Constant beeping may indicate a fault. Check the user manual for specific alarm codes.
What is the warranty period for the APC ACAC10061?
APC typically offers a 2-year warranty for UPS units. Batteries are covered for the first 2 years as well.
How do I clean and maintain the UPS?
Unplug the UPS before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquids or sprays. Regularly check air vents for dust buildup.
User questions about ACAC10061 APC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ACAC10061 - APC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACAC10061 by APC.
USER MANUAL ACAC10061 APC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : APC
Model : ACAC10061
Category : Uncategorized