PLMR22CR - Loudspeaker Pyle - Free user manual and instructions
Find the device manual for free PLMR22CR Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Marine Loudspeaker |
| Model | PLMR22CR |
| Brand | Pyle |
| Speaker Size | 6.5 inches (165 mm) |
| Speaker Type | 2-Way (woofer + tweeter) |
| Impedance | 4 Ohms |
| Power Handling (RMS) | 80 Watts RMS |
| Power Handling (Peak) | 160 Watts Peak |
| Frequency Response | 50 Hz - 20 kHz |
| Sensitivity | 90 dB (1W/1M) |
| Dimensions (Overall) | 7.2 x 7.2 x 3.5 inches |
| Mounting Depth | 2.95 inches (75 mm) |
| Cutout Diameter | 5.7 inches (145 mm) |
| Weight | 1.5 lbs (0.68 kg) each |
| Material | UV-resistant ABS plastic, rubber surround |
| Water Resistance | Yes (Marine grade, IPX5 rated) |
| Color | Black / Silver (CR) |
| Power Source | Passive speaker, requires external amplifier |
| Mounting Type | Flush mount / Surface mount (bracket included) |
| Terminals | Screw type, gold plated |
| Grille | Removable, rust-proof mesh |
| Maintenance | Clean with mild soap and water; avoid abrasive cleaners |
| Safety | Ensure secure mounting; disconnect power before installation |
| Spare Parts / Repairability | Contact Pyle support for service; no user-serviceable parts |
Frequently Asked Questions - PLMR22CR Pyle
What is the mounting depth of the Pyle PLMR22CR?
The mounting depth is approximately 2.95 inches (75 mm). Ensure your installation location provides enough clearance.
Are these speakers weatherproof?
Yes, the PLMR22CR is marine-grade with an IPX5 water resistance rating, making them suitable for boats, ATVs, and outdoor use.
What size hole do I need to cut for installation?
The required cutout diameter is 5.7 inches (145 mm). Use a template for accurate cutting.
Can I use these speakers with a factory stereo?
Yes, they are 4-ohm speakers compatible with most car and marine head units. For best performance, use an external amplifier.
What type of tweeter is used?
The speaker includes a 1-inch dome tweeter for clear high-frequency reproduction.
How do I connect the wires?
Use the gold-plated screw terminals. Strip the wire, insert, and tighten. Maintain correct polarity (positive to red, negative to black).
What is the RMS power handling?
The RMS power handling is 80 watts. Peak power handling is 160 watts. Do not exceed these limits.
Can these speakers be used indoors?
Yes, they work indoors as well, but their design is optimized for outdoor/marine environments.
Do they come with mounting hardware?
Yes, each speaker includes a mounting bracket, screws, and a template for installation.
Are these speakers sold in pairs?
The PLMR22CR is typically sold individually. Check your purchase details; some listings may be for a pair.
User questions about PLMR22CR Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PLMR22CR - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLMR22CR by Pyle.
USER MANUAL PLMR22CR Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PLMR22CR
Category : Loudspeaker