SVSC08B - Tumble dryer SVAN - Free user manual and instructions
Find the device manual for free SVSC08B SVAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | SVAN |
| Model | SVSC08B |
| Capacity | 8 kg |
| Drying Type | Condenser |
| Energy Rating | C |
| Height | 845 mm |
| Width | 600 mm |
| Depth | 650 mm |
| Weight | 45 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Noise Level | 65 dB(A) |
| Number of Programs | 12 |
| Control Type | Electronic push button + rotary knob |
| Display | LED |
| Features | Anti-crease, Delay start, Child lock |
| Lint Filter | Yes, clean after each cycle |
| Condenser Cleaning | Yes, periodic |
| Installation | Freestanding, do not install behind a door |
| Door Reversibility | Yes |
| Safety | Overheating protection, child lock |
| Spare Parts Availability | Drum belt, heating element, door seal |
| Warranty | 2 years |
| Manual | Free download available |
Frequently Asked Questions - SVSC08B SVAN
How do I install the SVSC08B tumble dryer?
Place the dryer on a solid, level surface. Ensure adequate ventilation around the appliance. Remove all packaging and transport bolts. Connect the power cord to a properly grounded outlet. Do not install behind a door or in a confined space.
What is the maximum load capacity?
The maximum load capacity is 8 kg. Overloading may affect drying performance and cause damage.
How do I clean the lint filter?
Clean the lint filter after every drying cycle. Open the door, pull the filter up, remove lint by hand or with a soft brush, rinse under water if needed, dry thoroughly, and reinsert.
Why is my dryer not drying clothes properly?
Check that the lint filter is clean, the condenser is not blocked, the load is not too large, and the room temperature is not too low. Also verify the correct program is selected.
How do I clean the condenser?
Locate the condenser unit (usually behind a lower flap). Remove it, rinse under running water to remove fluff, shake dry, and reinsert. Clean monthly or when indicator lights up.
Can I pause a drying cycle to add clothes?
Yes, press the start/pause button. Wait for the drum to stop, then open the door. Add clothes and close the door. Press start/pause again to resume.
What does the 'Child Lock' feature do?
The child lock prevents accidental button presses during operation. Activate by pressing and holding the relevant button for 3 seconds. Deactivate the same way.
How do I use the Delay Start function?
Select your drying program. Press the delay button repeatedly to set the desired delay time (e.g., 3, 6, 9 hours). Press start; the dryer will begin after the set delay.
What should I do if the dryer displays an error code?
Refer to the manual for error code definitions. Common codes include E1 (clogged filter) or E2 (water tank full). Clear the issue and reset the dryer. If persists, contact service.
How often should I clean the condenser?
Clean the condenser every month or when the indicator light appears. More frequently if the dryer is used heavily. Regular cleaning maintains efficiency.
User questions about SVSC08B SVAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual SVSC08B - SVAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SVSC08B by SVAN.
USER MANUAL SVSC08B SVAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SVAN
Model : SVSC08B
Category : Tumble dryer