SSB800A2DB - Tumble drier SVAN - Free user manual and instructions
Find the device manual for free SSB800A2DB SVAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Condenser Tumble Dryer |
| Brand | SVAN |
| Model | SSB800A2DB |
| Capacity | 8 kg |
| Dimensions (H x W x D) | 85 cm x 60 cm x 58 cm |
| Weight | 41 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Rated Power | 2200 W |
| Energy Class | B |
| Drying Programs | Cotton, Synthetics, Delicates, Mix, Rapid 60', Wool, Eco, Refresh |
| Drying Levels | Extra Dry, Cupboard Dry, Iron Dry |
| Display Type | LED |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Filter Type | Lint filter (front accessible) |
| Condenser Cleaning | Self-cleaning condenser (periodic manual cleaning recommended) |
| Drum Material | Stainless Steel |
| Reversing Drum | Yes |
| Noise Level | 65 dB(A) |
| Installation | Freestanding, can be stacked with matching washing machine |
Frequently Asked Questions - SSB800A2DB SVAN
How do I clean the lint filter?
Open the door, pull the filter upwards from the door sill. Remove lint by hand or with a soft brush, rinse under water if needed, dry thoroughly, then reinsert.
How often should I clean the condenser?
Every 3-6 months or when the 'Clean Condenser' indicator lights up. Access the condenser unit at the bottom front, remove and rinse with water, dry, and reinstall.
What does the 'Child Lock' do and how to activate it?
The child lock prevents accidental button presses during a cycle. Press and hold the 'Child Lock' button for 3 seconds to enable/disable. An indicator light will show when active.
Why is my dryer not heating properly?
Possible causes: clogged lint filter, full water tank (for condenser models), or faulty heating element. Clean filter and empty water tank first. If issue persists, contact service.
Can I dry wool items in this dryer?
Yes, use the 'Wool' program which uses low heat and gentle tumbling. Always check garment labels and avoid overloading.
How do I set a delayed start?
Select a drying program, then press the 'Delay Start' button repeatedly to set desired delay (1-24 hours). Press 'Start' to begin the countdown.
What does 'Empty Water Tank' mean?
For condenser dryers, water is collected in a tank. When full, the dryer stops and an indicator lights up. Pull out the tank, empty it, and slide back in.
What is the maximum load capacity?
The maximum load is 8 kg for dry cotton items. For synthetics and delicates, reduce load to half to avoid overloading.
How do I clean the drum?
Run an empty cycle with a damp cloth or use a dryer cleaning product. Wipe the drum interior with a soft cloth after each use to remove lint residues.
What does the 'Filter' indicator mean?
It reminds you to clean the lint filter after each cycle. If the light remains on, the filter may be clogged or the sensor needs resetting.
User questions about SSB800A2DB SVAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual SSB800A2DB - SVAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SSB800A2DB by SVAN.
USER MANUAL SSB800A2DB SVAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SVAN
Model : SSB800A2DB
Category : Tumble drier