PPHP157AI - Loudspeaker Pyle - Free user manual and instructions
Find the device manual for free PPHP157AI Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PA Loudspeaker |
| Model | PPHP157AI |
| Brand | Pyle |
| Speaker Size | 15 inches |
| Power Output | 2000 Watts Peak |
| Impedance | 8 Ohms |
| Frequency Response | 35 Hz - 20 kHz |
| Sensitivity | 95 dB |
| Dimensions (W x H x D) | 17.7 x 28.3 x 16.5 inches |
| Weight | 44.1 lbs |
| Power Supply | AC 120V/60Hz |
| Main Functions | Bluetooth, USB/SD playback, FM radio, microphone input |
| Bluetooth Version | 5.0 |
| Input Connectors | 1/4 inch and XLR microphone input, RCA line input |
| Output Connectors | 1/4 inch speaker output |
| Enclosure Material | MDF with carpet covering |
| Grille Material | Steel |
| Handles | 2 side handles, 1 top handle |
| Pole Mount | Yes, 35mm |
| Cleaning and Maintenance | Wipe with dry cloth; do not use solvents |
| Safety | Use only with included power cord; avoid moisture |
| Spare Parts and Repairability | Contact Pyle support for service; user replaceable fuse |
| General Information | Designed for portable PA applications |
Frequently Asked Questions - PPHP157AI Pyle
How do I pair my phone via Bluetooth?
Turn on the speaker and set it to Bluetooth mode (press the 'Mode' button until 'Bluetooth' appears). On your phone, enable Bluetooth and select 'PPHP157AI' from the list. If a PIN is required, enter '0000'.
Can I connect a microphone?
Yes, the speaker has two microphone inputs: one 1/4 inch (TS) and one XLR balanced input. Plug in your dynamic microphone and adjust the volume using the 'Mic Vol' knob.
What is the maximum power output?
The PPHP157AI has a peak power output of 2000 Watts and a continuous RMS power of approximately 1000 Watts (per IEC standards).
How can I play music from a USB drive?
Insert a USB flash drive with MP3 or WAV files into the USB port. Press the 'Mode' button to select 'USB'. The speaker will automatically play the first track. Use the 'Prev/Next' buttons to skip tracks.
Does it have an FM radio?
Yes, it includes a built-in FM radio. Switch to 'FM' mode using the Mode button. Press and hold the 'Scan' button to auto-scan stations. Use the 'Prev/Next' buttons to browse saved stations.
What are the dimensions and weight?
The speaker measures approximately 17.7 x 28.3 x 16.5 inches (WxHxD) and weighs about 44.1 lbs. It has handles for easy transport.
Can I mount it on a speaker stand?
Yes, the bottom has a 35mm pole mount socket, compatible with standard PA speaker stands. Ensure the stand is rated for the speaker's weight.
How do I clean the speaker?
Disconnect from power. Use a soft, dry cloth to wipe the enclosure and grille. Do not use any liquids, solvents, or abrasive cleaners, as they may damage the finish.
What should I do if there is no sound?
Check that the speaker is powered on and the volume is turned up. Verify the source device is sending audio. Ensure the correct input mode is selected (Bluetooth, USB, etc.). If using a microphone, make sure it is connected and the Mic volume is not at minimum.
Can I replace the fuse myself?
Yes, the fuse is user-replaceable. Located near the power cord input, unscrew the cap and replace with a fuse of the same type and rating (e.g., T5AL250V). Always disconnect power before attempting replacement.
User questions about PPHP157AI Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PPHP157AI - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PPHP157AI by Pyle.
USER MANUAL PPHP157AI Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PPHP157AI
Category : Loudspeaker