HW60-BP10636SKD - Washing machine HAIER - Free user manual and instructions
Find the device manual for free HW60-BP10636SKD HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Washing Machine |
| Brand | Haier |
| Model | HW60-BP10636SKD |
| Capacity | 6 kg |
| Spin Speed | 1000 rpm |
| Energy Class | A+++ |
| Noise Level (Wash/Spin) | 56 dB / 76 dB |
| Dimensions (H x W x D) | 85 x 60 x 54 cm |
| Weight | 63 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Type | Brushless Inverter |
| Number of Programs | 15 |
| Key Programs | Cotton, Synthetics, Delicates, Quick 15', Eco, Wool, Spin & Drain, Rinse & Spin |
| Additional Functions | Delay Start, Child Lock, Prewash, Extra Rinse, Temperature Adjustment, Spin Speed Adjustment |
| Display | LED Digital Display |
| Drum Material | Stainless Steel |
| Door Opening | Left hinge, 180° opening |
| Water Consumption | 42 L per cycle (eco) |
| Annual Energy Consumption | 152 kWh |
| Water Protection | AquaStop hose, leak protection |
| Self-Cleaning | Drum Clean program |
| Spare Parts Availability | At least 10 years |
| Repair Index | 8.2 / 10 |
Frequently Asked Questions - HW60-BP10636SKD HAIER
How to install the washing machine properly?
Ensure the machine is on a level floor. Remove all transport bolts. Connect the water inlet hose to a tap with 3/4" thread and the drain hose to a suitable outlet. Plug into a grounded outlet. Refer to the manual for detailed steps.
What does error code E1 mean?
Error E1 indicates a water supply problem. Check if the water tap is open, the inlet hose is not kinked, and the water pressure is sufficient. Also clean the inlet filter.
How to clean the detergent drawer?
Pull out the drawer, rinse under warm water, and use a soft brush to remove residue. Clean the compartment with a damp cloth. Reinsert properly.
Why is the machine not spinning?
Possible causes: unbalanced load, drain hose clogged, or safety lock active. Try redistributing clothes, clean the drain filter, or wait for the door lock to release.
What is the maximum load for a quick wash?
For Quick 15' program, load max 2 kg for best results. Overloading may cause poor cleaning or unbalanced spin.
How to use the child lock?
Press and hold the Child Lock button (often combination of two buttons) for 3 seconds until the indicator lights up. To unlock, repeat the action.
Can I wash wool and silk?
Yes, the machine has dedicated Wool and Delicates programs. Use cold water (max 30°C) and a mild detergent. Avoid spinning at high speed.
How often should I run the drum clean cycle?
Run the Drum Clean program every 2-3 months, or more frequently if you notice odors. Use a washing machine cleaner or bleach (follow instructions).
What to do if the machine leaks?
Check all hose connections, ensure the drain hose is properly secured, and inspect the door gasket for damage. If the leak persists, contact service.
How to activate the delay start?
Select a program, then press Delay Start button repeatedly to set desired delay (e.g., 1-24 hours). Close the door and press Start. The machine will start after the delay.
User questions about HW60-BP10636SKD HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual HW60-BP10636SKD - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HW60-BP10636SKD by HAIER.