HRS84 - Receiver ROLLS - Free user manual and instructions
Find the device manual for free HRS84 ROLLS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Receiver |
| Brand | Rolls |
| Model | HRS84 |
| Channels | 2.0 Stereo |
| Power Output | 50W per channel (8 ohms) |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | <0.05% |
| Inputs | 3x RCA, 1x Optical, 1x Coaxial |
| Outputs | Speaker terminals, RCA pre-out, Headphone jack |
| Remote Control | Included (IR) |
| Power Supply | AC 120V/60Hz |
| Power Consumption | 150W (max) |
| Dimensions (W x H x D) | 17.0 x 3.5 x 12.0 inches |
| Weight | 12.5 lbs |
| Material | Metal chassis, aluminum front panel |
| Finishes | Black or Silver |
| Cooling | Passive ventilation |
| Warranty | 2 years limited |
Frequently Asked Questions - HRS84 ROLLS
What should I do if there is no sound from the speakers?
Check the speaker connections, ensure the receiver is set to the correct input, and verify that the volume is turned up. Also check the speaker wires for any shorts.
How do I reset the receiver to factory settings?
Press and hold the 'Power' button for 10 seconds while the unit is on. The front panel lights will flash to confirm the reset.
Can I connect a turntable to the HRS84?
Yes, if your turntable has a built-in phono preamp, connect to any RCA input. If not, you will need an external phono preamp.
Why is the remote control not working?
Replace the batteries with new ones. Ensure there are no obstructions between the remote and the receiver's IR sensor. Also check if the remote's IR emitter is functioning.
What is the maximum power output per channel?
The HRS84 delivers 50 watts per channel into 8 ohms, with both channels driven.
How do I clean the receiver?
Unplug the unit and use a soft, dry cloth to wipe the exterior. Do not use any liquids or abrasive cleaners. For ventilation slots, use a vacuum cleaner with a brush attachment.
Can I use the receiver with 4 ohm speakers?
Yes, but the power output will be higher. Ensure adequate ventilation as the unit may run hotter. Do not operate at very high volumes for extended periods.
What does the 'Protect' indicator mean?
The protect mode activates if a short circuit or overheating is detected. Turn off the receiver, check speaker connections, and allow it to cool down. If the issue persists, contact support.
How do I switch between inputs?
Press the 'Input' button on the front panel or remote control to cycle through available inputs. The selected input will be displayed on the front panel.
Is the HRS84 compatible with Bluetooth?
No, the HRS84 does not have built-in Bluetooth. You can connect an external Bluetooth receiver to one of the RCA inputs.
User questions about HRS84 ROLLS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual HRS84 - ROLLS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HRS84 by ROLLS.
USER MANUAL HRS84 ROLLS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ROLLS
Model : HRS84
Category : Receiver