MP222 - Receiver ROLLS - Free user manual and instructions
Find the device manual for free MP222 ROLLS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Rolls |
| Model | MP222 |
| Category | Audio Receiver |
| Dimensions (W x H x D) | 430 x 100 x 300 mm |
| Weight | 5.5 kg |
| Power Supply | AC 110-240V, 50/60Hz |
| Power Consumption | 80W |
| FM Frequency Range | 87.5 - 108 MHz |
| AM Frequency Range | 530 - 1710 kHz |
| Number of Inputs | 4 stereo RCA inputs |
| Audio Output Power (per channel) | 50W RMS into 8 ohms |
| Impedance | 8 ohms |
| Signal-to-Noise Ratio | >90 dB |
| Total Harmonic Distortion | <0.05% |
| Tuner Type | Digital PLL synthesizer |
| Antenna | FM wire antenna, AM loop antenna |
| Remote Control | Yes, included |
| Included Accessories | Remote control, FM antenna, AM loop antenna, power cord |
| Material | Metal chassis, aluminum front panel |
| Color | Black |
| Warranty | 2 years |
| Country of Origin | China |
| Certifications | CE, FCC |
Frequently Asked Questions - MP222 ROLLS
How do I connect speakers to the MP222?
Connect the speaker wires to the binding posts on the back panel. Ensure the positive and negative terminals match. Use 8-ohm speakers for optimal performance.
How to set up the FM radio?
Connect the included FM wire antenna to the FM antenna terminal. Press the Source button to select FM. Use the Tuning knob to scan stations. Save presets by holding a preset button.
What is the maximum power output?
The MP222 delivers 50 watts per channel RMS into 8 ohms, with both channels driven. Peak power may be higher, but RMS is the continuous rating.
Can I connect a subwoofer?
Yes, use the Pre-Out jacks on the rear panel to connect an active subwoofer. This bypasses the internal amplifier for the low frequencies.
How to reset the unit to factory settings?
With the unit powered on, press and hold the Power button for 5 seconds until the display flashes. This restores default settings. Note: preset stations will be lost.
Why is there no sound from the speakers?
Check that the speaker wires are securely connected, the Source is selected correctly, and volume is turned up. Also ensure the unit is not in Mute mode.
How to clean the unit?
Use a soft, dry cloth to wipe the exterior. Do not use any chemical cleaners or liquids near the electronic components. Periodically dust the ventilation slots.
Can I use a turntable with this receiver?
Yes, but the MP222 does not have a built-in phono preamp. You will need an external phono preamp to connect a turntable to any RCA input.
What is the recommended speaker impedance?
The MP222 is designed for 8-ohm speakers. Using 4-ohm speakers may cause overheating. Refer to the manual for impedance specifications.
How to update the firmware?
The MP222 does not support firmware updates. All features are hardware-based. For new features, consider a newer model.
User questions about MP222 ROLLS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual MP222 - ROLLS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MP222 by ROLLS.
USER MANUAL MP222 ROLLS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ROLLS
Model : MP222
Category : Receiver