BOSS

NX524 - Car speaker BOSS - Free user manual and instructions

Find the device manual for free NX524 BOSS in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice BOSS NX524 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Type Coaxial Car Speaker
Size 6.5 inches (165 mm)
Impedance 4 ohms
Power Handling (RMS) 50 Watts
Power Handling (Peak) 150 Watts
Sensitivity 90 dB
Frequency Response 50 Hz - 20 kHz
Mounting Depth 2.5 inches (63.5 mm)
Mounting Hole Diameter 5.6 inches (142 mm)
Cone Material Polypropylene
Surround Material Rubber
Tweeter Type Balanced Dome Tweeter
Tweeter Diameter 1 inch (25 mm)
Magnet Size High-density ferrite
Grille Included Yes
Woofer Voice Coil 1.5 inches (38 mm), high-temperature
Wiring Connectors Standard spade terminals
Cleaning Wipe gently with a dry cloth. Do not use solvents.
Safety Disconnect power before installation. Use proper mounting hardware.
Repairability Not user-serviceable. Contact authorized service center.

Frequently Asked Questions - NX524 BOSS

What is the size of the Boss NX524 car speaker?
The Boss NX524 is a 6.5-inch coaxial speaker.
What is the power handling of the NX524?
It handles 50 watts RMS and 150 watts peak power.
What is the impedance of the Boss NX524?
The speaker has a nominal impedance of 4 ohms.
How do I install the NX524 in my car?
First, disconnect the car battery. Then remove the old speaker, connect the wiring matching polarity, and mount the new speaker securely with the included screws.
What is the sensitivity of the NX524?
Sensitivity is 90 dB, meaning it produces decent volume with moderate power.
What is the frequency response of this speaker?
The frequency response ranges from 50 Hz to 20 kHz, covering deep bass to clear highs.
Does the NX524 come with a grille?
Yes, a protective grille is included with the speaker.
Can I use the NX524 with a factory radio?
Yes, but for best performance, use an external amplifier that delivers at least 50 watts RMS per channel.
What is the mounting depth required for the NX524?
The mounting depth is 2.5 inches (63.5 mm). Ensure your door or panel has enough clearance.
How do I clean the NX524 speakers?
Wipe the speaker gently with a dry, soft cloth. Avoid using any liquids or chemical cleaners.

User questions about NX524 BOSS

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Car speaker in PDF format for free! Find your manual NX524 - BOSS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NX524 by BOSS.

USER MANUAL NX524 BOSS

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : BOSS

Model : NX524

Category : Car speaker