AC2709 - Uncategorized IFM - Free user manual and instructions
Find the device manual for free AC2709 IFM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inductive Proximity Sensor |
| Brand | IFM |
| Model | AC2709 |
| Dimensions (L x W x H) | Approx. 100 x 50 x 30 mm |
| Weight | Approx. 200 g |
| Housing Material | Stainless steel / Plastic |
| Power Supply | 24 V DC (10-30 V DC) |
| Current Consumption | < 50 mA |
| Output Type | PNP/NPN selectable |
| Sensing Range | 0-10 mm |
| Switching Frequency | 100 Hz |
| Protection Class | IP67 |
| Ambient Temperature | -25°C to +70°C |
| Connection | M12 connector, 4-pin |
| LED Indicators | Yes (output status) |
| Functions | Object detection, position sensing |
| Maintenance | Clean with dry cloth; no regular maintenance required |
| Safety | Use according to specifications; do not exceed voltage range |
| Spare Parts | Cables, connectors are available |
| Repair | Contact IFM service |
| General Information | RoHS compliant, CE marked |
Frequently Asked Questions - AC2709 IFM
How do I install the AC2709 sensor?
Install the sensor using the provided mounting bracket. Ensure the sensing face is free from obstructions. Connect to a 24V DC power supply and set the output type (PNP/NPN) according to your controller.
What is the operating voltage of the AC2709?
The AC2709 operates on a voltage range of 10-30 V DC, with a nominal voltage of 24 V DC.
What output types are available?
The sensor supports both PNP and NPN output configurations, selectable via a switch or wiring.
What is the sensing range of the AC2709?
The standard sensing range is 0-10 mm for a ferrous metal target.
What is the IP rating of the sensor?
The AC2709 has an IP67 protection class, making it suitable for dusty and wet environments.
How do I clean the sensor?
Clean the housing and sensing face with a dry, soft cloth. Do not use solvents or abrasive cleaners.
Can the sensor detect non-ferrous metals?
Yes, but the sensing range is reduced for non-ferrous metals. Typically, the range is 0-5 mm for aluminum or brass.
What type of connector does the AC2709 use?
The sensor features an M12 4-pin male connector. A mating cable with corresponding female connector is required.
Does the sensor have any LED indicators?
Yes, a yellow LED lights up when the output is active, indicating target detection.
How do I troubleshoot if the sensor does not detect objects?
Check the power supply voltage, verify wiring connections, ensure the sensing range is not exceeded, and confirm the target is within the specified material and distance. If the LED is off, the sensor may not be powered correctly.
User questions about AC2709 IFM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AC2709 - IFM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AC2709 by IFM.
USER MANUAL AC2709 IFM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IFM
Model : AC2709
Category : Uncategorized