E61443 - Uncategorized IFM - Free user manual and instructions
Find the device manual for free E61443 IFM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inductive Proximity Sensor |
| Model | E61443 |
| Brand | IFM |
| Dimensions | 40 × 25 × 20 mm (housing) |
| Weight | 60 g |
| Power Supply | 10–30 VDC |
| Operating Temperature | -25 to 70 °C |
| Protection Class | IP67 |
| Housing Material | Stainless steel 1.4301 |
| Connection | M12, 4-pin |
| Output | PNP switching output (NO) |
| Switching Distance | 4 mm (flush mountable) |
| Switching Frequency | 1 kHz |
| Functions | Metal object detection, LED indicator |
| Maintenance & Cleaning | Wipe with dry or slightly damp cloth, avoid solvents |
| Safety | Observe voltage limits; secure mounting; disconnect power before installation |
| Spare Parts & Reparability | Non-repairable; replace entire unit; spare parts available from IFM |
Frequently Asked Questions - E61443 IFM
What is the operating voltage of the IFM E61443?
The sensor operates on 10–30 VDC. Ensure the power supply is within this range to avoid damage.
How do I mount the E61443 sensor?
Mount the sensor using the provided mounting bracket. Ensure the sensing face is flush with the mounting surface for flush mounting. Tighten screws to recommended torque.
What is the sensing distance of this sensor?
The nominal switching distance is 4 mm for flush mounting. Actual distance may vary with target material and size.
Can the sensor detect non-metallic objects?
No, this is an inductive proximity sensor and only detects metal objects (ferrous and non-ferrous).
What does the LED indicator mean?
The yellow LED lights up when the sensor output is active (target detected). If the LED is off, no target is present.
How do I clean the sensor?
Clean the housing with a dry or slightly damp cloth. Do not use abrasive cleaners or solvents as they may damage the sensor.
What is the protection rating of the E61443?
The sensor is rated IP67, meaning it is dust-tight and protected against temporary immersion in water up to 1 meter for 30 minutes.
The sensor is not switching. What should I check?
First, verify the power supply is within 10–30 VDC. Check connections to the M12 plug. Ensure the target is metal and within the sensing distance. Clean the sensing face if contaminated.
Can I repair the sensor if it fails?
The E61443 is not user-serviceable. If defective, replace the entire unit. Contact IFM support for warranty or replacement options.
What certifications does the sensor have?
The sensor is CE and UL certified, complying with relevant safety and EMC standards.
User questions about E61443 IFM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual E61443 - IFM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E61443 by IFM.
USER MANUAL E61443 IFM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IFM
Model : E61443
Category : Uncategorized