P2001BT - Receiver Pyle - Free user manual and instructions
Find the device manual for free P2001BT Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Bluetooth Receiver / Amplifier |
| Marque | Pyle |
| Modèle | P2001BT |
| Puissance de sortie | 200W RMS (peak) |
| Version Bluetooth | 5.0 |
| Portée Bluetooth | Jusqu'à 30 mètres |
| Entrées | RCA, 3.5 mm aux, USB, micro SD |
| Sorties | Bornes haut-parleurs, RCA subwoofer |
| Tuner FM | Intégré avec antenne |
| Alimentation | AC 110-240V, 50/60Hz |
| Dimensions (L x H x P) | 10.2 x 2.5 x 6.7 pouces |
| Poids | 2.2 livres |
| Matériau du boîtier | Métal avec face avant en plastique |
| Fonctions principales | Streaming Bluetooth, amplification stéréo, tuner FM, lecture USB/SD, télécommande IR |
| Entretien et nettoyage | Essuyer avec un chiffon sec et doux |
| Sécurité | Ne pas exposer à l'humidité, débrancher avant nettoyage |
| Pièces détachées | Fusible de rechange disponible |
| Réparabilité | Ouverture possible par vis, pièces standard |
| Accessoires inclus | Télécommande, antenne FM, câble RCA, manuel |
| Impédance des haut-parleurs | 4-8 ohms |
| Rapport signal/bruit | > 85 dB |
Frequently Asked Questions - P2001BT Pyle
How do I connect my phone via Bluetooth?
Turn on the receiver and press the Bluetooth button on the front panel or remote. Enable Bluetooth on your phone, search for devices, and select 'P2001BT'. Pairing is usually automatic.
Can I use this receiver with passive speakers?
Yes, the P2001BT has built-in amplification and can drive passive speakers with an impedance of 4-8 ohms. Connect speaker wires to the spring clip terminals.
Why is there no sound from the speakers?
Check that the speakers are properly connected to the correct terminals, the volume is turned up, and the source is selected (e.g., Bluetooth, FM). Also ensure the receiver is not muted.
How do I reset the receiver to factory settings?
With the unit powered on, press and hold the Source button for about 5 seconds until the display shows 'RESET'. Release the button.
Can I play music from a USB drive?
Yes, insert a USB drive with MP3 or WMA files into the USB port. Press the USB button to select that source. The receiver will play files automatically.
How far can the remote control reach?
The IR remote has a range of about 8 meters (26 feet) when pointed directly at the receiver's sensor. Avoid obstructions.
Does the receiver have a subwoofer output?
Yes, there is a dedicated RCA subwoofer output labeled 'SUB OUT' on the back panel. Connect an active subwoofer for enhanced bass.
What should I do if the receiver overheats?
Ensure proper ventilation around the unit. Do not stack other devices on top. If overheating persists, reduce volume or turn off for a while. The unit has thermal protection that will shut it down automatically.
Can I use this receiver with a 12V battery?
The P2001BT is designed for AC mains power (110-240V). It is not recommended for 12V DC use without a proper inverter. Using incorrect power may damage the unit.
How do I improve FM radio reception?
Extend the included wire antenna fully and position it for best reception. You can also connect an external FM antenna to the screw terminal on the back.
User questions about P2001BT Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual P2001BT - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P2001BT by Pyle.