PLSPOOL16 - Loudspeaker Pyle - Free user manual and instructions
Find the device manual for free PLSPOOL16 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Floating Pool Speaker |
| Brand | Pyle |
| Model | PLSPOOL16 |
| Connectivity | Bluetooth 5.0 |
| Battery Type | Rechargeable Lithium-Ion |
| Battery Life | Up to 8 hours |
| Waterproof Rating | IPX7 (Submersible up to 1 meter for 30 minutes) |
| Dimensions (W x H x D) | 10.5 x 10.5 x 4.5 inches |
| Weight | 2.2 lbs |
| Power Output | 10W RMS |
| Speaker Type | Full-Range with Passive Radiator |
| Frequency Response | 100Hz – 20kHz |
| Impedance | 4 ohms |
| Signal-to-Noise Ratio | >80 dB |
| Charging Input | Micro USB (5V/1A) |
| Lights | Multi-Color LED |
| Control Buttons | Power, Volume +/-, Play/Pause, LED Mode |
| Included Accessories | Micro USB Charging Cable, Carabiner Clip |
| Functions | Bluetooth streaming, hands-free calling, LED light show |
| Care & Cleaning | Rinse with fresh water after pool use; dry thoroughly; avoid abrasive cleaners |
| Safety Precautions | Do not expose to extreme heat; keep away from children under 3; do not disassemble |
| Spare Parts & Repairability | Battery user-replaceable; other parts not available; contact Pyle support |
Frequently Asked Questions - PLSPOOL16 Pyle
How do I pair my Pyle PLSPOOL16 with a Bluetooth device?
Turn on the speaker by pressing the power button. The LED will flash blue. On your phone/tablet, enable Bluetooth and select 'PLSPOOL16' from the list. If prompted, enter PIN 0000. Once connected, the LED will stop flashing.
Is the PLSPOOL16 truly waterproof?
Yes, it has an IPX7 rating, meaning it can be submerged in water up to 1 meter for 30 minutes. It floats, making it ideal for pool use.
How long does the battery last on a full charge?
Battery life is up to 8 hours at moderate volume. Playing at maximum volume or with LED lights on will reduce battery life.
How do I charge the speaker?
Use the included Micro USB cable. Connect to a standard USB wall charger (5V/1A) or computer port. The LED indicator turns red while charging and green when fully charged. Charge time is about 3-4 hours.
Can I use the speaker while it's charging?
Yes, but it is not recommended to use it in water while charging. Keep the charging port dry.
How do I clean the speaker after pool use?
Rinse the speaker with clean fresh water to remove chlorine or salt. Dry with a soft cloth. Do not use harsh chemicals or abrasive materials. Ensure the charging port cover is sealed before rinsing.
What is the Bluetooth range?
The effective Bluetooth range is approximately 33 feet (10 meters) in open space. Walls or obstacles may reduce the range.
How do I reset the speaker?
If the speaker is unresponsive, press and hold the power button for 10 seconds until the LED turns off. Then turn it on again. This resets the Bluetooth module.
Can I connect two speakers together for stereo sound?
The PLSPOOL16 does not support TWS (True Wireless Stereo) pairing. It is a single mono speaker.
What should I do if the sound is distorted?
Check the volume level on both the speaker and your device. Ensure the speaker is not blocked or clogged. If distortion persists, try resetting the speaker (see FAQ). High volume may cause distortion; reduce the volume.
User questions about PLSPOOL16 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PLSPOOL16 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLSPOOL16 by Pyle.
USER MANUAL PLSPOOL16 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PLSPOOL16
Category : Loudspeaker