3BD967GN - Range hood BALAY - Free user manual and instructions
Find the device manual for free 3BD967GN BALAY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range hood |
| Brand | Balay |
| Model | 3BD967GN |
| Width | 60 cm |
| Depth | 50 cm |
| Height | 15 cm |
| Weight | 10 kg |
| Power Supply | 220-240 V, 50 Hz |
| Rated Power | 200 W |
| Maximum Airflow | 600 m³/h |
| Noise Level | 65 dB |
| Lighting | LED |
| Grease Filter Type | Aluminum |
| Activated Carbon Filter | Optional (sold separately) |
| Control Type | Push buttons |
| Operating Modes | Extraction or recirculation |
| Duct Diameter | 150 mm |
| Installation Type | Under cabinet |
| Energy Efficiency Class | A |
| Warranty | 2 years |
| Spare Parts Availability | Filters and lamps available from Balay service |
| Repairability Index | 8.2 / 10 |
| User Manual | Free download at notice-facile.com |
Frequently Asked Questions - 3BD967GN BALAY
How to install the Balay 3BD967GN range hood?
Installation should be done by a qualified professional. Ensure the hood is mounted at least 65 cm above electric hobs and 70 cm above gas hobs. Use the provided template for screw positions and connect to a proper duct if in extraction mode.
How to clean the grease filters?
Remove the aluminum grease filters and wash them in warm soapy water or in the dishwasher at low temperature. Dry thoroughly before reinstalling. Clean them every 2-3 months to maintain efficiency.
How to replace the activated carbon filter?
If using recirculation mode, replace the activated carbon filter every 6-12 months. To replace, remove the grease filter, slide out the old carbon filter, and install a new one (model BCF-XX sold separately).
Why is my range hood noisy?
Noise may increase if filters are dirty or if the duct is blocked. Clean the filters and check the duct for obstructions. Normal noise level is around 65 dB on maximum setting.
How to change the LED lamp?
Switch off power to the hood. Remove the lamp cover by prying gently. Pull out the LED module and replace with a compatible LED (Balay part number LED-XX). Reattach the cover.
Can I use the hood in recirculation mode?
Yes, the hood can be used in recirculation mode if you install the optional activated carbon filter. You will also need to block the duct outlet or use a recirculation kit.
What are the dimensions of the Balay 3BD967GN?
The hood width is 60 cm, depth 50 cm, and height 15 cm. Cutout dimensions for under-cabinet installation are typically 56 x 48 cm.
How to reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the 'Filter' button for 3 seconds until the indicator light goes off. This resets the timer.
Why does the hood not start?
Check that the mains plug is connected and circuit breaker is on. Ensure the control buttons are not stuck. If still not working, contact Balay service.
Where can I download the user manual?
The manual for Balay 3BD967GN is available for free in PDF at notice-facile.com. You can also request a translated version via email.
User questions about 3BD967GN BALAY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual 3BD967GN - BALAY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3BD967GN by BALAY.
USER MANUAL 3BD967GN BALAY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BALAY
Model : 3BD967GN
Category : Range hood