SASC656 - Speaker Stand Scosche - Free user manual and instructions
Find the device manual for free SASC656 Scosche in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Speaker Stand |
| Brand | Scosche |
| Model | SASC656 |
| Material | Steel with black powder coating |
| Height Range | 24 to 36 inches (adjustable) |
| Base Diameter | 12 inches |
| Top Plate Size | 6 x 6 inches |
| Weight Capacity | Up to 50 lbs per stand |
| Net Weight | 6.5 lbs each |
| Adjustable Height | Yes, with locking pin mechanism |
| Assembly Required | Minimal, tool-free assembly |
| Compatibility | Most bookshelf speakers up to 50 lbs |
| Cable Management | Integrated cable routing channels |
| Non-Slip Pads | Yes, on top plate and feet |
| Care Instructions | Wipe with a dry or slightly damp cloth |
| Safety Warning | Do not exceed weight limit; place on stable surface |
| Included Accessories | Two stands, screws, and manual |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - SASC656 Scosche
How do I adjust the height of the Scosche SASC656 speaker stand?
To adjust the height, remove the locking pin, slide the inner tube to the desired height (24 to 36 inches), then reinsert the pin into the matching hole. Ensure the pin is fully engaged before placing the speaker.
What is the maximum weight capacity of the SASC656?
The maximum weight capacity is 50 lbs (22.7 kg) per stand. Exceeding this limit may cause instability or damage.
Is assembly required for the speaker stand?
Assembly is minimal and tool-free. The base attaches to the pole with a threaded knob, and the top plate screws onto the pole. Detailed instructions are included in the manual.
Are the speaker stands compatible with all bookshelf speakers?
The SASC656 is designed for most bookshelf speakers up to 50 lbs. The top plate measures 6x6 inches, so speakers with a smaller base may require additional padding or adapter plates.
How do I manage cables using these stands?
The stand features integrated cable routing channels inside the tubular legs. Run your speaker wire from the top plate down through the channel and out at the base for a clean look.
Can I use the SASC656 outdoors?
The stands are made of steel with a powder-coated finish, which can withstand light outdoor use. However, prolonged exposure to moisture may cause rust. It is recommended to use indoors or under cover.
What should I do if the stand wobbles?
First, ensure all locking knobs and pins are tight. Place the stand on a level surface. If wobbling persists, the floor may be uneven; use the adjustable rubber feet on the base to level the stand.
Are replacement parts available for the SASC656?
Yes, Scosche offers replacement parts such as top plates, locking pins, and base knobs. Contact Scosche customer support or visit their website to order.
How do I clean the speaker stands?
Wipe the stands with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners, as they may damage the powder-coated finish.
Does the SASC656 come with a warranty?
Yes, the Scosche SASC656 is covered by a limited lifetime warranty against defects in materials and workmanship. Retain your receipt for warranty claims.
User questions about SASC656 Scosche
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker Stand in PDF format for free! Find your manual SASC656 - Scosche and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SASC656 by Scosche.
USER MANUAL SASC656 Scosche
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Scosche
Model : SASC656
Category : Speaker Stand