AXIPCL2 - Uncategorized Scosche - Free user manual and instructions
Find the device manual for free AXIPCL2 Scosche in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bluetooth FM Transmitter |
| Brand | Scosche |
| Model | AXIPCL2 |
| Dimensions | 4.0 x 2.0 x 0.8 inches |
| Weight | 1.5 oz |
| Power Source | 12V Cigarette Lighter Socket |
| Bluetooth Version | 5.0 |
| Bluetooth Range | Up to 30 feet |
| Audio Input | Bluetooth, AUX (3.5mm) |
| Audio Output | FM Radio (87.5-108.0 MHz) |
| USB Charging Ports | 2 (5V/2.1A total) |
| Hands-free Calling | Yes, with built-in microphone |
| Music Streaming | Yes, from Bluetooth devices |
| Display | LED frequency display |
| Frequency Range | 87.5 - 108.0 MHz |
| Compatibility | All Bluetooth-enabled devices |
| Material | ABS plastic |
| Installation | Plug and play |
| Safety Features | Overvoltage protection, short circuit protection |
| Cleaning | Wipe with dry cloth |
| Warranty | 1 year limited |
Frequently Asked Questions - AXIPCL2 Scosche
How do I pair my phone with the AXIPCL2?
Enable Bluetooth on your phone, turn on the AXIPCL2, and select 'Scosche AXIPCL2' from available devices. If prompted, enter PIN 0000.
Can I use the AUX input and Bluetooth simultaneously?
No, the device automatically switches to the most recent input source. You can only use one at a time.
How do I find a clear FM frequency?
Tune your car radio to an unused frequency (e.g., 88.1, 88.3), then set the transmitter to the same frequency. Press the SCAN button on the transmitter to automatically find a clear channel.
Why is there no sound from my car speakers?
Ensure the transmitter is set to the same frequency as your car radio. Check that your phone's volume is turned up. Also verify the Bluetooth connection is active.
Can I charge my phone while using the transmitter?
Yes, the AXIPCL2 includes two USB ports to charge your devices. Use a compatible charging cable.
How do I reset the device?
Press and hold the power button for 10 seconds until the LED flashes rapidly. Release and turn it on again. This will clear paired devices.
Does it support hands-free calling?
Yes, the built-in microphone allows you to make and receive calls. When a call comes in, it will automatically interrupt the audio.
What should I do if the transmitter overheats?
Unplug it immediately and let it cool down. Check that the car's 12V socket is clean and the device is not covered. Overheating may indicate a fault; contact support.
Is the AXIPCL2 compatible with my iPhone?
Yes, it works with any Bluetooth-enabled device, including iPhones (iOS 8.0 and later). For wired connection, use the AUX port.
How do I clean the device?
Use a soft, dry cloth to wipe the exterior. Do not use water or cleaning agents. Keep the ports free of dust.
User questions about AXIPCL2 Scosche
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AXIPCL2 - Scosche and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXIPCL2 by Scosche.
USER MANUAL AXIPCL2 Scosche
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Scosche
Model : AXIPCL2
Category : Uncategorized