PA10 - Receiver Fluance - Free user manual and instructions
Find the device manual for free PA10 Fluance in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Phono Preamplifier |
| Brand | Fluance |
| Model | PA10 |
| Dimensions (W x D x H) | 4.5 x 3.5 x 1.2 inches (approx.) |
| Weight | 0.5 lbs (approx.) |
| Power Supply | 12V DC adapter (included) |
| Inputs | 1x RCA phono input (L/R) |
| Outputs | 1x RCA line output (L/R) |
| Gain | 40 dB (MM) / 60 dB (MC) selectable |
| Equalization | RIAA standard |
| Signal-to-Noise Ratio | > 80 dB |
| Total Harmonic Distortion | < 0.01% |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Input Impedance | 47k ohms (MM) / 100 ohms (MC) |
| Output Impedance | 100 ohms |
| Subsonic Filter | Yes, switchable |
| Ground Terminal | Yes |
| Material | Aluminum chassis |
| Compliance | CE, RoHS |
| Included Accessories | AC adapter, RCA cables, user manual |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use solvents. |
| Safety | Use only the provided power adapter. Do not expose to moisture. |
| Repairability | No user-serviceable parts. Contact Fluance support. |
Frequently Asked Questions - PA10 Fluance
What turntables are compatible with the Fluance PA10?
The PA10 works with any turntable that has a phono output. It supports both moving magnet (MM) and moving coil (MC) cartridges via a selectable gain switch.
Does the PA10 require a power supply?
Yes, the PA10 is powered by an included 12V DC adapter. Plug it into a standard wall outlet.
How do I connect the PA10 to my receiver or speakers?
Connect the turntable's RCA cables to the INPUT jacks on the PA10. Then connect the PA10's OUTPUT jacks to any line-level input (e.g., AUX, CD) on your receiver or amplifier.
Do I need to ground my turntable with the PA10?
If your turntable has a ground wire, connect it to the ground terminal on the back of the PA10 to reduce hum and noise.
How do I switch between MM and MC cartridges?
Use the gain switch on the rear panel: set to 40 dB for MM cartridges and 60 dB for MC cartridges. Always power off before switching.
What is the purpose of the subsonic filter?
The subsonic filter removes low-frequency rumble (below 20 Hz) that can cause woofer distortion. It can be enabled via a switch on the front or rear panel.
Can I use the PA10 with a USB turntable?
The PA10 is an analog phono preamp. It does not support USB connections. Use it with turntables that have standard RCA outputs.
Why is there no sound or very low volume?
Check that the PA10 is powered on, the input and output cables are secure, and the receiver is set to the correct input. Also verify the gain setting matches your cartridge type.
How do I clean and maintain the PA10?
Keep the unit in a dry, dust-free environment. Clean the exterior with a soft, dry cloth. Do not use liquids or abrasive cleaners. Ensure proper ventilation.
Is the PA10 repairable?
The PA10 has no user-serviceable parts inside. If you experience issues, contact Fluance customer support for warranty or repair options.
User questions about PA10 Fluance
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PA10 - Fluance and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PA10 by Fluance.
USER MANUAL PA10 Fluance
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fluance
Model : PA10
Category : Receiver