FSM7326P - Network switch NETGEAR - Free user manual and instructions
Find the device manual for free FSM7326P NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE Switch |
| Model | FSM7326P |
| Brand | NETGEAR |
| Ports | 24 x 10/100/1000 PoE, 2 x Gigabit SFP |
| PoE Standard | IEEE 802.3af/at |
| PoE Power Budget | 192W |
| Switching Capacity | 52 Gbps |
| Forwarding Rate | 38.69 Mpps |
| MAC Address Table | 8K entries |
| VLAN Support | Up to 256 VLANs |
| Management | Web, SNMP, CLI |
| Dimensions (W x D x H) | 440 x 260 x 44 mm (1U) |
| Weight | 4.5 kg |
| Power Supply | Internal AC, 100-240V, 50-60Hz, 250W max |
| Cooling | 1 fan |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Safety Certifications | CE, FCC, UL |
| Warranty | Limited Lifetime |
| Maintenance | Clean with dry cloth; avoid liquids |
| Spare Parts & Repairability | Contact NETGEAR support for replacement units |
Frequently Asked Questions - FSM7326P NETGEAR
How do I reset the Netgear FSM7326P to factory defaults?
Press and hold the Factory Reset button on the front panel for at least 10 seconds while the switch is powered on. Release when the System LED starts flashing.
Can I use the SFP ports for standard Ethernet connections?
No, the SFP ports require compatible Gigabit SFP transceivers (fiber or copper). They are not standard RJ45 ports.
What is the maximum PoE power per port?
Each PoE port can deliver up to 30.8 Watts (IEEE 802.3at), with a total budget of 192 Watts shared across all ports.
How do I access the web management interface?
Ensure your computer is on the same subnet. Open a browser and enter the default IP 192.168.0.239. Use username admin and password password (or none).
Can I create VLANs on this switch?
Yes, the FSM7326P supports up to 256 VLANs (802.1Q). Configure via the web interface or CLI under VLAN configuration.
Does this switch support SNMP?
Yes, it supports SNMP v1, v2c, and v3 with MIBs for management. Enable in the Security section of the web interface.
How do I update the firmware?
Download the latest firmware from NETGEAR's support site. Go to Maintenance > Firmware Upgrade in the web interface and upload the file.
What are the power requirements?
It requires an AC power source rated 100-240V, 50-60Hz. The internal power supply draws up to 250W when all PoE ports are active.
Can I stack multiple FSM7326P switches?
No, this model does not support physical stacking. You can manage them individually via SNMP or with NETGEAR's ProSAFE Plus Utility.
How do I clean the switch?
Disconnect power. Use a soft, dry cloth to wipe the exterior. Do not use liquids or sprays. Ensure vents are free of dust.
User questions about FSM7326P NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual FSM7326P - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FSM7326P by NETGEAR.
USER MANUAL FSM7326P NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : FSM7326P
Category : Network switch