GS752TSB - Network switch NETGEAR - Free user manual and instructions
Find the device manual for free GS752TSB NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | Netgear |
| Model | GS752TSB |
| Ports | 48 Gigabit Ethernet ports + 4 SFP+ uplink ports |
| Stacking | Supported (up to 8 units) |
| Management | Smart Managed with web GUI, CLI, SNMP |
| Dimensions (W x D x H) | 440 x 257 x 44 mm (1U height) |
| Weight | Approximately 4.3 kg |
| Power Supply | Internal, 100-240V AC, 50-60Hz |
| Power Consumption | Maximum 38.5W |
| Cooling | 2 x built-in fans (front-to-back airflow) |
| VLAN Support | 802.1Q VLAN, up to 256 groups |
| QoS | 802.1p, DSCP, 8 priority queues |
| Security Features | MAC ACL, IP ACL, 802.1X, DoS prevention |
| Management Protocols | SNMP v1/v2c/v3, RMON, sFlow |
| Jumbo Frame Support | Up to 9K bytes |
| MAC Address Table | 16K entries |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.95 Mpps |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with dry cloth; avoid liquids and dust |
| Safety | Use provided power cord; ensure proper grounding |
| Spare Parts / Repairability | Field-replaceable power supply and fan modules; contact support for parts |
| Warranty | 5 years |
Frequently Asked Questions - GS752TSB NETGEAR
How do I access the web interface of the Netgear GS752TSB?
By default, the switch obtains an IP address via DHCP. Use the Netgear Switch Discovery Tool to find it, then enter the IP in a browser. The default login is 'admin' with password 'password'.
What is the default IP address of the GS752TSB?
The switch is configured to use DHCP by default. If no DHCP server is available, it falls back to 192.168.0.239. Check your router's DHCP list or use the discovery tool.
How do I reset the GS752TSB to factory defaults?
Press and hold the Factory Defaults button on the front panel for about 10 seconds using a paperclip until the LEDs flash. The switch will reboot with factory settings.
Can I stack multiple GS752TSB switches?
Yes, the GS752TSB supports stacking via the dedicated stacking ports. Up to 8 units can be stacked, managing them as a single switch.
How do I configure VLANs on the GS752TSB?
Access the web interface, go to Switching > VLAN > 802.1Q VLAN. Create VLANs, assign ports with tagged or untagged membership, and apply changes.
What is the maximum number of VLANs supported?
The GS752TSB supports up to 256 802.1Q VLAN groups and up to 4096 VLAN IDs.
Does the GS752TSB support link aggregation?
Yes, it supports Link Aggregation (LAG) using IEEE 802.3ad. You can create up to 8 LAG groups, each with multiple ports.
How can I troubleshoot if the switch is not powering on?
Check the power cord and outlet. Ensure the voltage is correct (100-240V). If still off, the internal power supply may be faulty. Contact support for replacement.
What kind of SFPs are supported?
The 4 SFP+ ports support 1G and 10G SFP/SFP+ modules. Use Netgear compatible modules (e.g., AGM731F for 1G, AXM761 for 10G) for best performance.
How do I update the firmware?
Download the latest firmware from Netgear support. Go to Maintenance > Download > HTTP File Download, upload the file, and follow prompts. Do not power off during update.
User questions about GS752TSB NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual GS752TSB - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS752TSB by NETGEAR.
USER MANUAL GS752TSB NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : GS752TSB
Category : Network switch