H110I-C4P - Motherboard ECS - Free user manual and instructions
Find the device manual for free H110I-C4P ECS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motherboard |
| Brand | ECS |
| Model | H110I-C4P |
| Chipset | Intel H110 |
| CPU Socket | LGA1151 |
| Supported Processors | 6th/7th Gen Intel Core i7/i5/i3/Pentium/Celeron |
| Memory | 2 x DDR4 DIMM, up to 32GB, DDR4 2133/2400 MHz |
| Expansion Slots | 1 x PCIe 3.0 x16 |
| Storage | 4 x SATA 6Gb/s |
| USB Ports | 6 x USB 3.0 (2 rear, 4 via header), 6 x USB 2.0 (2 rear, 4 via header) |
| Audio | Realtek ALC887, 7.1 Channel HD Audio |
| LAN | Realtek RTL8111H Gigabit Ethernet |
| Form Factor | Mini-ITX (170mm x 170mm) |
| Power Supply | ATX power connector (24-pin + 4-pin) |
| Dimensions | 170mm x 170mm (6.7" x 6.7") |
| Weight | Approx. 0.5 kg (1.1 lbs) |
| Operating System Support | Windows 7/8.1/10 (64-bit) |
| Cooling | 1 x CPU fan header, 1 x system fan header |
| Rear I/O | 1 x PS/2, 1 x VGA, 1 x HDMI, 2 x USB 3.0, 2 x USB 2.0, 1 x RJ45, 3 x audio jacks |
| Internal Connectors | USB 3.0 header, USB 2.0 headers, front panel audio, serial port header, TPM header |
| BIOS | 64 Mb AMI UEFI BIOS |
| Cleaning | Use compressed air; avoid liquids |
| Safety | Follow ESD precautions; disconnect power before installation |
Frequently Asked Questions - H110I-C4P ECS
How do I install the CPU and cooler on this motherboard?
Align the CPU with the socket notches, lower the lever, apply thermal paste, and attach the cooler securely to the mounting holes.
Does the H110I-C4P support DDR4 2400MHz memory?
Yes, it supports DDR4 2133/2400 MHz memory modules up to 16GB per slot for a total of 32GB.
How can I update the BIOS on this ECS motherboard?
Download the latest BIOS from ECS website, save to FAT32 USB, enter BIOS setup, and use the EZ Flash utility to update.
What power supply wattage is recommended for this motherboard?
A quality 300W or higher ATX power supply is sufficient for typical builds, but higher for discrete GPUs.
Can I use a 7th Gen Intel Core i7-7700K on this motherboard?
Yes, after a BIOS update (version F1 or later), the H110I-C4P supports 7th Gen Kaby Lake processors.
How do I connect the front panel headers?
Refer to the manual for pin layout; typically power switch, reset, HDD LED, power LED are located near the bottom edge of the board.
Does this motherboard have an M.2 slot?
No, the H110I-C4P does not include an M.2 connector. It uses SATA SSDs via the four 6Gb/s ports.
What graphics card can I install?
It has one PCIe 3.0 x16 slot, compatible with most modern graphics cards, but ensure case clearance.
Why is my system not booting after assembly?
Check CPU and power connections, reseat RAM, clear CMOS by removing battery for 30 seconds, and ensure all cables are secure.
How do I reset the BIOS password?
Remove the CMOS battery for a few minutes, or use the clear CMOS jumper (JBAT1) after disconnecting power.
User questions about H110I-C4P ECS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual H110I-C4P - ECS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H110I-C4P by ECS.
USER MANUAL H110I-C4P ECS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ECS
Model : H110I-C4P
Category : Motherboard