GTX18ESSJWW - Tumble dryer GE - Free user manual and instructions
Find the device manual for free GTX18ESSJWW GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Vented Tumble Dryer |
| Brand | GE |
| Model | GTX18ESSJWW |
| Capacity | 7.0 cu. ft. |
| Dimensions (H x W x D) | 38.0 x 27.0 x 28.0 inches |
| Weight | 120 lbs |
| Power Supply | 240V, 30A, 60Hz |
| Energy Consumption | ~680 kWh/year (estimated) |
| Drying Cycles | Automatic, Timed Dry, Air Fluff, Delicates, Bulky Items, Wrinkle Care |
| Sensor Drying | Yes, Auto Dry with moisture sensor |
| Temperature Settings | High, Medium, Low, Air Only |
| Lint Filter | Removable, cleanable mesh filter |
| Exhaust Vent | 4-inch rear vent (transitions to side or bottom) |
| Control Type | Dial and push buttons |
| Interior Drum Light | Yes |
| End of Cycle Signal | Selectable on/off |
| Wrinkle Care Option | Periodic tumbling after cycle end |
| Door | White, reversible (left or right swing) |
| Warranty | 1 year parts and labor |
| Spare Parts Availability | Through GE Appliance parts website or authorized dealers |
Frequently Asked Questions - GTX18ESSJWW GE
How do I clean the lint filter on my GE GTX18ESSJWW dryer?
To clean the lint filter, open the door and pull the filter straight up from the door opening. Roll lint off with your fingers, then rinse under warm water if needed. Dry thoroughly before reinstalling. Clean after every cycle for optimal performance.
What does the Wrinkle Care feature do?
The Wrinkle Care feature periodically tumbles the load without heat after the cycle ends to prevent wrinkles. It can be activated by pressing the Wrinkle Care button before starting a cycle.
Why is my dryer not heating?
Common causes include a tripped circuit breaker, faulty thermal fuse, or clogged vent. Check that the dryer is plugged into a 240V outlet and the breaker is on. If the issue persists, inspect the vent for blockages. Refer to the manual for thermal fuse location.
How do I reverse the door swing?
The door is reversible. Remove the door hinge screws, rotate the door 180°, and re-attach hinges on the opposite side. The instruction manual provides step-by-step guidance. Ensure you have a screwdriver and take care not to damage the door gasket.
What is the capacity of the GTX18ESSJWW?
The dryer has a capacity of 7.0 cubic feet, suitable for medium to large laundry loads. Avoid overloading for efficient drying.
How can I reset the dryer?
Unplug the dryer or turn off the circuit breaker for 1-2 minutes. Plug it back in and open/close the door. This can reset electronic controls and clear temporary fault codes.
What do the error codes on the display mean?
Common codes: PF (power failure) – verify power supply; dL (door not closing); tE (thermistor issue). Refer to the manual's troubleshooting section for full list. If codes persist, contact GE service.
Can I use a dryer sheet with this model?
Yes, you can use dryer sheets. However, avoid overuse as residue can build up on the lint filter and sensor, reducing performance. Clean the filter regularly and occasionally wipe the moisture sensor with rubbing alcohol.
What type of venting is required?
The dryer requires a 4-inch rigid or flexible metal vent to the outside. Maximum vent length is 90 feet with one 90° elbow. Use smooth-walled duct for optimal airflow and lint buildup prevention.
How do I adjust the drying temperature?
Turn the Temperature dial to select High (heavy fabrics), Medium (mixed loads), Low (delicates), or Air Only (no heat). For timed dry, you can also adjust temperature independently.
User questions about GTX18ESSJWW GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual GTX18ESSJWW - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GTX18ESSJWW by GE.