APXD10JAWB - Air conditioner GE - Free user manual and instructions
Find the device manual for free APXD10JAWB GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Window Air Conditioner |
| Model | APXD10JAWB |
| Brand | GE |
| Cooling Capacity (BTU) | 10,000 BTU |
| Energy Efficiency Ratio (EER) | 12.0 |
| Voltage | 115 V |
| Amperage | 8.5 A |
| Plug Type | 5-15P |
| Dimensions (W x H x D) | 23.6" x 15.5" x 20.4" |
| Weight | 62 lbs |
| Room Size (Recommended) | Up to 450 sq ft |
| Controls | Electronic with Remote |
| Modes | Cool, Fan, Energy Saver |
| Fan Speeds | 2 (Low, High) |
| Air Direction | 4-Way Adjustable |
| Filter Type | Washable Mesh Filter |
| Installation Type | Window Mounted |
| Noise Level (dB) | 52 dB (High) |
| Refrigerant | R-32 |
| Energy Star Certified | Yes |
| Warranty | 1 Year Limited |
Frequently Asked Questions - APXD10JAWB GE
How do I clean the filter on my GE APXD10JAWB air conditioner?
Turn off and unplug the unit. Remove the front grille by pulling it outward. Take out the filter, rinse it with warm water, and let it dry completely before reinstalling. Clean the filter every 30 days for optimal performance.
What is the proper installation procedure for the APXD10JAWB?
Ensure the window is clean and the sill is level. Attach the side curtains to the unit, then lift the air conditioner into the window frame. Lower the window sash behind the top guide, and extend the side curtains to seal gaps. Secure with screws and foam sealant provided.
How do I set the timer on my GE APXD10JAWB?
Press the Timer button on the remote or control panel. Use the + and - buttons to set the desired time (1-24 hours). The unit will automatically turn on or off after the set time. Confirm by pressing Timer again.
What does the error code 'E1' on my APXD10JAWB mean?
Error code E1 indicates a temperature sensor malfunction. Unplug the unit for 10 minutes, then plug it back in. If the error persists, contact GE customer service for repair or replacement.
Can I use an extension cord with my GE air conditioner?
No, extension cords are not recommended due to fire risk. Plug the unit directly into a grounded 115V outlet. If the cord is too short, have a qualified electrician install a new outlet near the window.
How do I drain water from the APXD10JAWB?
The APXD10JAWB has a self-evaporating system that minimizes water collection. In humid conditions, water may accumulate. Locate the drain plug at the rear bottom of the unit, place a pan beneath, and remove the plug to drain. Replace plug securely.
What is the recommended room size for the APXD10JAWB?
This 10,000 BTU air conditioner is designed for rooms up to 450 square feet. For best results, ensure the room is well-insulated and windows are shaded.
How do I use the Energy Saver mode?
Press the Energy Saver button on the remote or panel. In this mode, the fan cycles on and off with the compressor, reducing energy consumption. The fan continues to run for a few minutes after the compressor stops to circulate cool air.
Why is my APXD10JAWB not cooling enough?
Check if the filter is dirty and needs cleaning. Ensure the unit is properly sized for the room and windows are closed. Also verify that the temperature setting is lower than room temperature and the mode is set to 'Cool'.
How do I replace the remote control batteries?
Slide the battery cover off the back of the remote. Remove old batteries and insert two new AAA batteries, matching the + and - markings. Reattach the cover. Dispose of old batteries properly.
User questions about APXD10JAWB GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual APXD10JAWB - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. APXD10JAWB by GE.