L8FNC68S - Washing machine AEG - Free user manual and instructions
Find the device manual for free L8FNC68S AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Front-loading washing machine |
| Brand | AEG |
| Model | L8FNC68S |
| Capacity | 8 kg |
| Dimensions (H x W x D) | 850 x 600 x 550 mm |
| Weight | 75 kg |
| Energy Efficiency Class | A |
| Maximum Spin Speed | 1600 rpm |
| Noise Level (Spin/Wash) | 76 dB / 52 dB |
| Water Consumption per Cycle | 48 L |
| Annual Energy Consumption | 157 kWh |
| Number of Programs | 12 |
| Key Programs | Cotton, Synthetics, Delicates, Wool, Hand Wash, Quick 30, Outdoor, Steam |
| Motor Type | ÖKOInverter (brushless) |
| Steam Function | ProSteam for refresh and wrinkle reduction |
| Display | LED with remaining time indicator |
| Child Lock | Yes |
| Delay Start | Yes, up to 24 hours |
| Safety Features | Overflow protection, foam control, imbalance detection |
| Maintenance Indicators | Clean drum, clean pump, descaling |
| Door Opening | 180° hinge, emergency opening |
| Installation Type | Freestanding |
Frequently Asked Questions - L8FNC68S AEG
How to install the washing machine?
Ensure the floor is level and stable. Remove transit bolts from the back. Connect the water inlet hose to a cold water supply with a 3/4 inch threaded tap. Attach the drain hose to a standpipe or sink outlet, ensuring it is at least 60 cm high. Level the machine by adjusting the feet, and plug into a grounded socket.
What should I do if the machine does not start?
Check if the door is properly closed, the water supply is turned on, the power plug is inserted, and the circuit breaker has not tripped. Ensure no delay start is set. If the display shows an error code, refer to the manual.
How to clean the detergent drawer?
Press the catch inside the drawer to remove it completely. Wash the drawer with warm water and a soft brush. Clean the recess with a damp cloth. Reinsert the drawer fully. Do this every 3 months to avoid buildup.
What does the 'E10' error code mean?
Error code E10 indicates a water supply issue. Check that the taps are open, the inlet hose is not kinked, and the water pressure is sufficient. Clean the inlet filter at the back of the machine.
Can I use a liquid detergent with the Quick 30 program?
Yes, but use a small amount. For quick programs, it is recommended to use powder or liquid with the correct dispenser. Avoid overfilling the detergent drawer to prevent residues.
How often should I clean the pump filter?
Clean the pump filter every 3 months or if the machine fails to drain. Open the lower flap, place a container under the filter, turn and pull it out, remove any debris, and reinsert securely.
What is the maximum load for the Wool program?
The Wool program is designed for up to 2 kg of machine-washable wool garments. Do not overload to ensure gentle handling and proper cleaning.
How to activate the Child Lock?
Press and hold the 'Delay Start' button for 3 seconds until the Child Lock indicator illuminates. To deactivate, press and hold again. The lock prevents children from changing settings during a cycle.
Why is the drum making noise during spinning?
Noise can be caused by unbalanced loads, such as a single heavy item. Pause the machine and redistribute the laundry. Also check that the machine is level and transit bolts are removed.
What does the 'Clean Drum' indicator mean?
The Clean Drum indicator reminds you to run a maintenance cycle. Use the Drum Clean program (empty drum, no detergent) or a high-temperature cycle with a cleaning agent. Repeat every 2-3 months.
User questions about L8FNC68S AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual L8FNC68S - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. L8FNC68S by AEG.