GE

Profile DPSE810GGWT - Tumble dryer GE - Free user manual and instructions

Find the device manual for free Profile DPSE810GGWT GE in PDF.

📄 32 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice GE Profile DPSE810GGWT - page 2
View the manual : English EN Español ES
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Tumble Dryer
Brand GE
Model Profile DPSE810GGWT
Color White
Capacity 7.5 cu. ft.
Height 38 inches
Width 27 inches
Depth 30 inches
Weight 130 lbs
Power Supply 240V, 30A, 60Hz
Drying Programs Normal, Heavy Duty, Delicates, Timed Dry, Steam Dewrinkle
Control Type Electronic with LED display
Steam Function Yes (Steam Refresh)
Drum Material Stainless Steel
Reversible Door Yes
Lint Filter Indicator Yes
Moisture Sensor Yes
Energy Star Certified Yes
Noise Level 65 dB
Warranty 1 year parts and labor
Installation Type Freestanding
Vent Type Vented
Stackable Yes with optional kit
Pedestal Compatible Yes

Frequently Asked Questions - Profile DPSE810GGWT GE

How do I clean the lint filter?
Open the dryer door and pull the lint filter out from the lint filter housing. Roll off the lint by hand and rinse the filter under running water if needed. Let it dry completely before reinstalling. Clean the filter after every load for optimal performance.
Why is my dryer not heating?
Check that the dryer is plugged in and the circuit breaker is not tripped. Ensure the lint filter is clean and the exhaust vent is not blocked. Also, verify that a high-limit thermostat or thermal fuse hasn't blown. If the problem persists, consult a qualified technician.
How do I use the steam function?
Add water to the built-in water reservoir if required. Select the 'Steam Refresh' or 'Steam Dewrinkle' cycle on the control panel. This cycle uses moisture to reduce wrinkles and odors without a full wash. Do not overload the dryer for steam cycles.
How do I reverse the door?
Unplug the dryer. Remove the door hinge screws and lift off the door. Remove the blank cover plates from the opposite side and reposition the door hinge. Reattach the door and secure with screws. Refer to the door reversal section of your manual for detailed instructions.
What does error code 'E1' mean?
Error code 'E1' typically indicates a failure in the electronic control board or a sensor malfunction. Try resetting the dryer by unplugging it for 5 minutes. If the code reappears, contact GE customer service for assistance.
How do I clean the moisture sensor?
To clean the moisture sensor, locate the two metal strips inside the dryer drum (usually near the lint filter). Use a soft cloth dampened with mild detergent to gently wipe the strips. Rinse with a damp cloth and dry thoroughly. Do not use abrasive cleaners.
Can I stack this dryer?
Yes, the GE Profile DPSE810GGWT can be stacked with a compatible GE front-load washer using the optional stacking kit. The kit ensures stability and safety. Installation instructions are included with the stacking kit.
How do I reset the dryer?
Turn the dryer off and unplug it from the power outlet. Wait for at least 5 minutes. Plug the dryer back in and set the desired cycle. This reset clears temporary electronic glitches. If the issue continues, professional service may be needed.
What is the proper ventilation for this dryer?
This dryer must be vented outdoors using rigid or flexible metal ductwork. The maximum duct length is 25 feet. Use a single 4-inch diameter exhaust outlet. Ensure the vent is clear of lint and obstructions to prevent fire hazards and reduce drying times.
How do level the dryer to minimize vibration?
Adjust the leveling legs located at the bottom corners of the dryer. Turn the legs clockwise to lower or counterclockwise to raise the dryer. Use a carpenter's level on top of the machine. Once level, tighten the lock nuts against the base to secure the legs.

User questions about Profile DPSE810GGWT GE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Tumble dryer in PDF format for free! Find your manual Profile DPSE810GGWT - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Profile DPSE810GGWT by GE.

USER MANUAL Profile DPSE810GGWT GE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : GE

Model : Profile DPSE810GGWT

Category : Tumble dryer