IT9002 - Range hood HAIER - Free user manual and instructions
Find the device manual for free IT9002 HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Haier |
| Model | IT9002 |
| Mounting Type | Under Cabinet |
| Width | 30 inches |
| Depth | 17.5 inches |
| Height | 6 inches |
| Weight | 22 lbs |
| Power Supply | 120 V, 60 Hz, 0.8 A |
| Motor Type | Centrifugal Fan |
| Fan Speeds | 3 |
| Maximum Airflow | 400 CFM |
| Noise Level | 55 dB |
| Lighting | 2 x 40 W Incandescent (LED compatible) |
| Control Type | Push Button |
| Filter Type | Aluminum Mesh Grease Filter |
| Ducting | Top Exhaust, 6-inch Round |
| Energy Efficiency | Standard |
| Certifications | cULus |
| Warranty | 1 Year Parts and Labor |
Frequently Asked Questions - IT9002 HAIER
How do I install the Haier IT9002 range hood?
Installation should be performed by a qualified professional. The hood is designed for under-cabinet mounting. Ensure the cabinet above is capable of supporting the weight. Connect ductwork to a 6-inch round duct for exhaust. Electrical connection requires a grounded 120V outlet. Refer to the manual for detailed steps.
How often should I clean the grease filters?
Clean the aluminum mesh grease filters every month for optimal performance. Remove filters and wash them with warm soapy water or in the dishwasher. Dry thoroughly before reinstalling. Replace if damaged.
Why is my range hood noisy?
Noise may increase due to clogged filters, loose parts, or improper installation. Clean filters first. Check for any loose screws or duct connections. If noise persists, contact service. Normal operation is around 55 dB.
What type of light bulbs does the IT9002 use?
The hood uses two 40-watt incandescent bulbs (E12 base). You can replace them with LED equivalents of similar size and wattage for energy savings. Ensure bulbs are cool before handling.
Can I use the range hood in recirculation mode?
The IT9002 is designed for ducted exhaust. For recirculation, you need a recirculation kit (not included) with charcoal filters. Check with Haier for compatible accessories.
How do I reset the filter indicator?
After cleaning or replacing filters, press and hold the fan speed button for 3 seconds until the indicator light turns off. Refer to the manual for exact procedure.
What is the warranty coverage?
The Haier IT9002 comes with a 1-year limited warranty covering parts and labor for manufacturing defects. Proof of purchase is required. Warranty does not cover misuse, improper installation, or damage from cleaning agents.
Why is the hood not turning on?
Check if the power cord is plugged in and the circuit breaker is not tripped. Ensure the control buttons are not stuck. If still not working, there may be a motor or electrical issue. Contact customer service.
What tools are needed for installation?
You will need a drill, screwdriver (Phillips and flathead), measuring tape, level, duct tape, and possibly a stud finder. Safety glasses and gloves recommended. Professional install is advised.
How do I replace the light bulbs?
Turn off power to the hood. Locate the bulb access panel or remove the glass cover. Unscrew the bulb and replace with a new 40W max E12 base bulb. Avoid touching the bulb with bare hands. Reassemble and restore power.
User questions about IT9002 HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual IT9002 - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IT9002 by HAIER.
USER MANUAL IT9002 HAIER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAIER
Model : IT9002
Category : Range hood