HSH60RSX1 - Range hood HAIER - Free user manual and instructions
Find the device manual for free HSH60RSX1 HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Haier |
| Model | HSH60RSX1 |
| Width | 60 cm |
| Depth | 50 cm |
| Height (min) | 50 cm |
| Weight | 12 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 150 W |
| Motor Power | 200 W |
| Max Airflow | 650 m³/h |
| Noise Level (max) | 65 dB(A) |
| Control Type | Electronic Push Button |
| Lighting | 2 x 1.5 W LED |
| Filter Type | Aluminium Grease Filter |
| Venting Type | Ducted / Recirculation (with carbon filter) |
| Number of Speeds | 3 |
| Cleaning | Grease filter washable in dishwasher |
| Safety Features | Auto shut-off timer, thermal fuse |
| Installation Type | Under-cabinet / Wall-mounted |
| Accessories Included | Carbon filter (for recirculation), duct adapter |
Frequently Asked Questions - HSH60RSX1 HAIER
How often should I clean the grease filter?
We recommend cleaning the grease filter every 3 to 6 months, or more frequently if you cook heavily. The filter is dishwasher safe.
Can the range hood be used in recirculation mode?
Yes, the HSH60RSX1 can be used in recirculation mode with a carbon filter (included). Ensure the carbon filter is replaced every 6-12 months.
What is the ideal installation height above the cooktop?
For optimal performance, install the range hood 65-75 cm above an electric cooktop and 75-85 cm above a gas cooktop.
How do I reset the filter alarm?
After cleaning or replacing the filter, press and hold the 'Speed' button for 3 seconds until the alarm indicator turns off.
What should I do if the hood stops working?
Check the power supply and circuit breaker. If the thermal fuse has tripped, wait 30 minutes for it to reset. If the problem persists, contact Haier service.
Can I use ducting smaller than the outlet diameter?
No, the duct diameter should match the outlet (150 mm). Using a smaller duct reduces performance and increases noise.
How do I replace the carbon filter?
Open the grease filter flap, remove the old carbon filter, and insert a new one. Close the flap and reset the filter alarm.
Why is the hood noisy?
Normal noise levels vary from 50 to 65 dB. Excessive noise may indicate a blocked filter or loose ductwork. Ensure the filters are clean and ducts are properly sealed.
Can I install the hood without a duct?
Yes, if you use the recirculation mode. You must install the carbon filter and direct the air back into the room.
What are the dimensions for the cutout if installing in a cabinet?
The cutout should be 560 mm wide and 280 mm deep. Refer to the installation template for precise measurements.
User questions about HSH60RSX1 HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual HSH60RSX1 - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HSH60RSX1 by HAIER.
USER MANUAL HSH60RSX1 HAIER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAIER
Model : HSH60RSX1
Category : Range hood