AP327X - Access Point WatchGuard - Free user manual and instructions
Find the device manual for free AP327X WatchGuard in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Point |
| Brand | WatchGuard |
| Model | AP327X |
| Wi-Fi Standards | 802.11a/b/g/n/ac Wave 2 |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Max Data Rate | Up to 1.733 Gbps (5 GHz) + 300 Mbps (2.4 GHz) |
| MIMO Configuration | 3x3 MU-MIMO |
| Ethernet Ports | 1x 10/100/1000 Base-T (PoE In) |
| Power Supply | PoE (802.3af/at) or 12V DC adapter (optional) |
| Power Consumption | Typical 10W, Max 15W |
| Dimensions (W x D x H) | 200 x 200 x 45 mm |
| Weight | 0.8 kg |
| Operating Temperature | 0°C to 40°C |
| Humidity | 5% to 95% non-condensing |
| Mounting | Ceiling or wall mount (bracket included) |
| Security Features | WPA2/WPA3, 802.1X, AES encryption |
| Management | WatchGuard Wi-Fi Cloud, Local Web UI, CLI |
| Antenna Type | Internal omnidirectional |
| LED Indicators | 1x Power/Status, 1x LAN, 1x WLAN |
| Compliance Certifications | FCC, CE, IC, RoHS |
| Maintenance | Clean with a soft dry cloth; avoid liquids |
| Spare Parts Availability | Contact WatchGuard support for replacements |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - AP327X WatchGuard
How do I power the WatchGuard AP327X?
The AP327X can be powered via PoE (802.3af/at) using a compatible switch or injector, or using an optional 12V DC power adapter (not included).
What is the default IP address of the AP327X?
The default IP is 192.168.1.1 if the AP is in standalone mode. In managed mode, it obtains an IP via DHCP.
How do I reset the AP327X to factory defaults?
Press and hold the Reset button on the device for about 10 seconds using a paperclip until the LED blinks rapidly.
Can I mount the AP327X on a wall?
Yes, the AP327X includes a mounting bracket for wall or ceiling installation. Use the provided screws and anchors.
What is the maximum number of clients supported?
The AP327X supports up to 256 clients (128 per radio) in optimal conditions.
Does the AP327X support mesh networking?
Yes, it can be used in a mesh configuration with other WatchGuard access points using the Wi-Fi Cloud management system.
How do I update the firmware?
Firmware updates can be applied via the local web interface or centrally through WatchGuard Wi-Fi Cloud. Always back up settings first.
What is the range of the AP327X?
Typical indoor range is 30-50 meters depending on obstacles and radio environment. Outdoor range is less recommended.
Can I use the AP327X with a non-WatchGuard router?
Yes, in standalone mode it works as a standard access point with any router. However, advanced features require a WatchGuard controller.
What LEDs are on the AP327X and what do they mean?
There are three LEDs: Power (solid green = on), LAN (blinks = activity), and WLAN (blinks = wireless activity). Refer to the manual for status codes.
User questions about AP327X WatchGuard
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual AP327X - WatchGuard and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AP327X by WatchGuard.
USER MANUAL AP327X WatchGuard
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WatchGuard
Model : AP327X
Category : Access Point