AP120 - Access Point WatchGuard - Free user manual and instructions
Find the device manual for free AP120 WatchGuard in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Model | AP120 |
| Wireless Standard | 802.11ac Wave 2, 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | 867 Mbps (5 GHz) + 300 Mbps (2.4 GHz) |
| Antenna Type | Internal dual-band omnidirectional, 2x2 MIMO |
| Interfaces | 1 x 10/100/1000 Ethernet (RJ-45) with PoE |
| Power Supply | 802.3af PoE or 12V DC adapter (not included) |
| Power Consumption | Typical 8W, maximum 12W |
| Dimensions | 160 x 160 x 30 mm (6.3 x 6.3 x 1.2 in) |
| Weight | 300 g (0.66 lb) |
| Mounting | Wall or ceiling mount (kit included) |
| Management | WatchGuard Wi-Fi Cloud (cloud-based) or local web UI |
| Security | WPA2-PSK, WPA2-Enterprise, WPA3, 802.1X, MAC filtering |
| VLAN Support | Yes, 802.1Q VLAN tagging |
| SSIDs | Up to 16 per radio |
| Mesh Support | Yes, WatchGuard Mesh |
| LED Indicators | Power, LAN, 2.4G, 5G |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 5% to 95% non-condensing |
| Warranty | Limited lifetime warranty |
| Certifications | FCC, CE, RoHS |
Frequently Asked Questions - AP120 WatchGuard
How do I reset the WatchGuard AP120 to factory defaults?
Press and hold the reset button on the back panel for 10 seconds using a paperclip. The LED will flash and the AP will reboot with factory settings.
What are the power requirements for the AP120?
The AP120 supports Power over Ethernet (PoE) 802.3af or a 12V DC adapter. The maximum power consumption is 12W.
Can the AP120 be mounted on a wall or ceiling?
Yes, the AP120 includes a mounting kit for wall or ceiling installation. Use the provided screws and anchors for secure mounting.
How do I configure the AP120?
You can configure the AP120 via the WatchGuard Wi-Fi Cloud web interface or the local web UI. Connect via Ethernet, obtain an IP via DHCP, and access the default IP (192.168.1.1) or use the cloud management portal.
What security protocols does the AP120 support?
It supports WPA2-PSK, WPA2-Enterprise, WPA3 (in transition mode), 802.1X, and MAC address filtering for secure wireless access.
How many SSIDs can I create on the AP120?
You can create up to 16 SSIDs per radio (2.4 GHz and 5 GHz), allowing separate networks for guests, employees, IoT devices, etc.
Can the AP120 be used as part of a mesh network?
Yes, the AP120 supports WatchGuard Mesh technology, allowing wireless uplink between APs without wired backhaul.
What is the typical wireless range of the AP120?
Indoor range is approximately 30-50 meters (100-165 ft) depending on obstacles and interference. For best performance, keep AP centrally located.
How do I update the firmware on the AP120?
Firmware updates can be performed via the WatchGuard Wi-Fi Cloud interface or via the local web UI under 'Administration > Firmware Upgrade'. The AP will download and apply the update.
What does the LED status indicator mean?
Solid green: power on and operating normally. Flashing green: booting or firmware upgrade. Red: error or no network link. Off: no power.
User questions about AP120 WatchGuard
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual AP120 - WatchGuard and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AP120 by WatchGuard.
USER MANUAL AP120 WatchGuard
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WatchGuard
Model : AP120
Category : Access Point