AT-OME-EX-KIT-LT - Wi-Fi repeater Atlona - Free user manual and instructions
Find the device manual for free AT-OME-EX-KIT-LT Atlona in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater |
| Brand | Atlona |
| Model | AT-OME-EX-KIT-LT |
| Dimensions | 4.5 x 2.8 x 1.2 inches (114 x 71 x 30 mm) |
| Weight | 0.3 lbs (136 g) |
| Power Supply | USB powered (5V DC, 1A) |
| Wireless Standard | 802.11 b/g/n (2.4 GHz) |
| Maximum Data Rate | Up to 300 Mbps |
| Coverage Area | Up to 1500 sq ft |
| Supported Devices | Up to 32 |
| Security | WPA/WPA2 encryption |
| Setup Methods | WPS button, web interface |
| Functions | Extend existing Wi-Fi, access point mode |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Low voltage; keep away from heat sources |
| Spare Parts | Not available (sealed unit) |
| Repairability | Not user-serviceable; contact support |
| General | For home and office use |
Frequently Asked Questions - AT-OME-EX-KIT-LT Atlona
How do I set up the AT-OME-EX-KIT-LT repeater?
Press the WPS button on your router and then on the repeater within 2 minutes. Alternatively, connect to the repeater's Wi-Fi and configure via the web interface at 192.168.10.1.
Why is my connection speed slow after installing the repeater?
Ensure the repeater is placed within good range of the router (about 50% signal strength). Avoid obstacles like walls and metal. Also check for interference from other devices.
Can I use the repeater with any router?
Yes, it is compatible with any standard router that supports 802.11 b/g/n on 2.4 GHz. It works with most brands.
How do I reset the repeater to factory defaults?
Press and hold the reset button on the device for about 10 seconds using a paperclip. Release when the LED starts blinking.
What is the maximum range of the repeater?
The coverage area is up to 1500 sq ft, but actual range depends on environment and walls.
Does the repeater support 5 GHz Wi-Fi?
No, this model only supports 2.4 GHz (802.11 b/g/n). It does not have a 5 GHz band.
How many devices can connect to the repeater simultaneously?
It supports up to 32 devices at once, depending on bandwidth usage.
Can I use the repeater with a Wi-Fi extender or mesh system?
Yes, it can work with any existing Wi-Fi network, including extenders, as long as the router is within range.
How to update the firmware?
Download the latest firmware from the Atlona website. Access the repeater's admin page, go to 'Firmware Upgrade', and upload the file.
What do the LED lights indicate?
Solid green LED: connected to router. Blinking green: searching. Red: no connection. Refer to the manual for detailed LED status.
User questions about AT-OME-EX-KIT-LT Atlona
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual AT-OME-EX-KIT-LT - Atlona and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-OME-EX-KIT-LT by Atlona.
USER MANUAL AT-OME-EX-KIT-LT Atlona
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atlona
Model : AT-OME-EX-KIT-LT
Category : Wi-Fi repeater