27148 - Controller HUNTER - Free user manual and instructions
Find the device manual for free 27148 HUNTER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Irrigation Controller |
| Model | 27148 |
| Brand | Hunter |
| Dimensions (W x H x D) | 10.5 x 8.5 x 2.5 inches |
| Weight | 1.2 lbs |
| Power Supply | 24 VAC, 50/60 Hz, 1.5 A |
| Number of Stations | 4 |
| Programs | 3 independent programs (A, B, C) |
| Start Times per Program | 4 start times |
| Station Duration | 1 minute to 99 minutes, 59 seconds |
| Watering Features | Seasonal adjustment, rain delay, manual watering |
| Display | LCD with backlight |
| Mounting | Indoor wall mount |
| Operating Temperature | 32°F to 140°F (0°C to 60°C) |
| Waterproof Rating | IP54 (indoor use only) |
| Safety | Fuse protected, low voltage transformer |
| Spare Parts | Transformer (part # 466100), faceplate (part # 27148-FP) |
| Repairability | Modules and wiring replaceable |
| Warranty | 2 years limited |
| Compliance | FCC, CE, RoHS |
Frequently Asked Questions - 27148 HUNTER
How do I set the date and time on my Hunter controller?
Press the Set Date/Time button. Use the + and - buttons to adjust year, month, day, hour, and minute. Press Enter to confirm each step.
What should I do if the display is blank?
Check that the transformer is plugged in and the power supply is working. Ensure the circuit breaker is on. If still blank, replace the fuse (3A, 250V).
Can I water specific zones manually?
Yes. Press Manual, select a station using the arrow keys, then set the duration. Press Enter to start manual watering.
How do I program a watering schedule?
Press Program to select A, B, or C. Set start times with Start Time and station run times. Adjust days to water via Water Days.
What does the rain sensor do?
The controller has a rain sensor bypass. Connect a rain sensor (not included) to the terminals. When active, watering is automatically skipped.
How do I reset the controller to factory defaults?
Press and hold the Clear button for 5 seconds. The display will show 'Reset'. Confirm with Enter to restore defaults.
Why is my controller not starting watering at the scheduled time?
Check that the program is enabled, date/time is correct, and the rain sensor is not active. Also verify that the water supply is on and the valve wires are connected.
What type of batteries does the controller use?
The controller uses a 9V alkaline battery (not included) to retain settings during power outages. Insert it into the battery compartment on the back.
How often should I clean the controller?
Wipe the exterior with a damp cloth. Keep inside dry. Inspect terminals annually for corrosion. Do not use solvents or abrasive cleaners.
Where can I find replacement parts or accessories?
Visit hunterindustries.com or contact your local dealer. Common parts: transformer (#466100), faceplate (#27148-FP), and mounting screws.
User questions about 27148 HUNTER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual 27148 - HUNTER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 27148 by HUNTER.
USER MANUAL 27148 HUNTER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HUNTER
Model : 27148
Category : Controller